Mr2 W/e Broken E-trigger Switch

[jack_hammer]

I need to change the switch of my MR2 w/o eyes because it is broken. The switch still works but if I want to select a different mode I have to use an Allen Hex to do it. I need to change this switch to an aftermarket one urgently.

I live outside USA and it is so difficult to get a new switch or board by Kingman from here. We do not have any Kingman representative dealer in this country. If you have any solution, please let me know.

Regards.:)

[oldironmudder]

The switch on the board? IF you have a store nearby that sells electric parts, like Radio Shack, take the board in there & match it up. Desolder the stock one & solder the new one on it.


Have you tried to call Kingman? They might be able to send you one, new board, but you need to talk it over with them.

World Headquarters
14010 Live Oak Ave.
Baldwin Park, CA 91706 USA
Toll Free: 888-KINGMAN
Ph: 626-430-2300
Fax: 626-851-8530

They are on the west coast. Time zone wise they are GMT -8.

[jack_hammer]

I will go to an electric parts store. Thanks Bro.

[oldironmudder]

I will go to an electric parts store. Thanks Bro.

No problem, thats what we (KUSA/SOC) are here for.