PDA

View Full Version : Rust coming out from my E-MR1, Help plz

BDAVID
10-20-2009, 02:12 PM
Hi there

Recently after I have played a few games with my new E-MR1 (I think I've played 4 games with it so far) I've noticed some rust coming out from the trigger frame and now I'm worried... Should I be?

I took this photo to try to illustrate the problem, but you can't acctually SEE the rust, but it's there, in a very thin layer... It is also visible on the striker and the spring...

http://img101.imageshack.us/img101/3621/emr1.jpg (http://img101.imageshack.us/i/emr1.jpg/)

What should I do?

Thanks for any kind of help,

Bruno David

Brazil
DFSniper
10-20-2009, 02:16 PM
it happens. you can sand it down or leave it, it wont really mess up the gun.
BDAVID
10-20-2009, 02:26 PM
No need to lubricate then?
DFSniper
10-20-2009, 02:33 PM
no. as long as you lubricate your internals, you'll be fine.
BDAVID
10-20-2009, 02:36 PM
no. as long as you lubricate your internals, you'll be fine.

Alright thanks for the help, but when you say internals do you mean the striker-bolt o-ring? Or some part inside the e-trigger?

Thanks again
DFSniper
10-20-2009, 02:43 PM
yes, the striker and bolt. oil shouldnt get in the trigger itself.
sonik
10-20-2009, 05:58 PM
on the steel springs, I usually wipe them with a little 3-in-1 oil. clean with wd-40 and then 3-in-1...