View Full Version : MR2 working beautifully except...

06-06-2009, 07:06 AM
Well, I was able to break out my MR2 w/eye at Skirmish. The marker fired great but if I walked the trigger in semi, it would fire at an automatic rate aka 25 bps. I would then have to stop pulling the trigger and then pull once more to reset the marker.

Any ideas?

slim and shady
06-06-2009, 08:17 AM
Well I have never heard of that before. You have a stock board right? You could always pull the red jumper off the board so the marker would be semi only.

06-06-2009, 06:39 PM
The board is stock. Only upgrades are a JJ 14 and trinity offset feedneck. The board was replaced under warranty as the original was fried on delivery.

slim and shady
06-06-2009, 06:42 PM
Funny I never have that problem, and honestly have never heard of it before either. Take the jumper out see what happens.

06-06-2009, 10:01 PM
It's called bounce, more likely mechanical bounce. You need to back the trigger off the microswitch lever a bit more before it'll stop. Surprised you didn't mention puking a lot of paint when that happened -

06-06-2009, 11:41 PM
Not one break the entire day Dragon. Must be the rotor I have on top. No puking just people yelling wtf, he's got an auto and the ref became most curious after that happened in front of him.

06-07-2009, 08:18 AM

06-07-2009, 05:41 PM
ya...you need to back the trigger off the switch some...

slim and shady
06-07-2009, 10:17 PM
Im not convinced that it is bounce, although it very well could be, and I havent heard any better sugestions. But bounce usually has differing velocitys and chops along with it. He never said he had either. But its a simple enough thing to back the trigger off and see. Let us know.

06-08-2009, 06:26 AM
bounce doesnt always mean chops, he has a rotor which has proven to shoot 40 bps.... I can shoot with some trigger bounce with my Halo B

slim and shady
06-08-2009, 11:13 PM
What about velocity indifferences? and I dont mean a few fps with mine when I had bounce, I would have notible drops in the shots. I use a halo B with v35 and rip drive. either way its a simple easy thing to check and see if that is the problem so its a good place to start.