PDA

View Full Version : Mr1 is burping


Extreme-RecBaller
05-18-2009, 05:51 PM
Hey, my Mr1 is burping, what is it, could it be the striker o-ring? anything else it could be?

ferret15
05-18-2009, 06:06 PM
if your shooting to fast and using CO2 it will burp

oil your bolt o-rings, and striker.
put a drop of oil in the asa and air up, dry fire for a bit and comeback.

Extreme-RecBaller
05-18-2009, 06:11 PM
if your shooting to fast and using CO2 it will burp

oil your bolt o-rings, and striker.
put a drop of oil in the asa and air up, dry fire for a bit and comeback.I did that already.

ferret15
05-18-2009, 06:18 PM
if your shooting to fast and using CO2 it will burp

oil your bolt o-rings, and striker.
put a drop of oil in the asa and air up, dry fire for a bit and comeback.

ok.. but what about these to options?

also if you have or after you have, when and how does it burp.

Extreme-RecBaller
05-18-2009, 07:02 PM
ok.. but what about these to options?

also if you have or after you have, when and how does it burp.

Ok, it burps on it's way back even on the first shot, and sometimes doesn't re-cock all the way, i also have a slight leak problem internally.

paintballkid0206
05-18-2009, 07:06 PM
if your shooting to fast and using CO2 it will burp


i just have to say this... i didnt know you could shoot fast with the MR1? show me how! :P

ferret15
05-18-2009, 07:15 PM
Ok, it burps on it's way back even on the first shot, and sometimes doesn't re-cock all the way, i also have a slight leak problem internally.
oh now thats a different problem,
-pop the valve out and manually lube the oring that seals the air or replace it with a tank o-ring. Then put it back together and try again.

i just have to say this... i didnt know you could shoot fast with the MR1? show me how! :P

with CO2 you can, i'm pretty sure that when weather is a factor and the gun is at just the wrong angle there becomes too much liquid CO2 in the gun and there for uncocks. are you happy now? quit trying to call a brotha out.

paintballkid0206
05-18-2009, 07:22 PM
sorry, just jokin around...

bigred76
05-18-2009, 07:55 PM
You're such a thread killer. Ferret's just a nublet. Co2 recharges at 17bps on average. If it was winter, I'd assume that was the issue as there are people on here that live in very cold climates, but it's not the case as it's not winter.

I'd change your striker o-ring.

ferret15
05-18-2009, 08:05 PM
If it was winter, I'd assume that was the issue as there are people on here that live in very cold climates, but it's not the case as it's not winter.

I'd change your striker o-ring.

that is usually the problem if you didn't notice that i mentioned the weather.

Anti-siphon tanks have a higher recharge rate otherwise i haven't seen anything higher than 13bps out of CO2 and that's been on multiple guns

one more thing, he just said its leaking so either he is just making stuff up lubing the striker o-ring isn't going to be enough

slim and shady
05-18-2009, 08:05 PM
oil your valve and cup seal (the cup seal is probably the leak you hear more then likly comming out the barrel)
Also as red said change the striker oring. Your problems should be solved.