PDA

View Full Version : will my gun work with this tank


lordvader952
05-13-2009, 06:17 PM
Hay i got a spyder rsx and i was worndering if my low pressure crossfire 68ci tank.
cause it says work pressure is at 250psi and the tank is 450psi

DFSniper
05-13-2009, 07:25 PM
it'll work, but it'll work better with a high pressure tank.

lordvader952
05-14-2009, 03:22 PM
well u got LP and not HP cause it said it was a LP operation marker

DFSniper
05-14-2009, 04:33 PM
right. but thats just the regs. the stock reg converts it down to LP operating pressure (below 450psi). SOME angel regs cant handle the 850psi output of normal tanks, which is what the LP tanks were designed for. think of it this way, when your tanks is putting out 850 psi and your reg is putting out 250, your have a 600psi buffer zone to help with faster recharge. on the other hand, with a 450psi tank, you only have a 200psi buffer zone.

lordvader952
05-14-2009, 04:53 PM
right. but thats just the regs. the stock reg converts it down to LP operating pressure (below 450psi). SOME angel regs cant handle the 850psi output of normal tanks, which is what the LP tanks were designed for. think of it this way, when your tanks is putting out 850 psi and your reg is putting out 250, your have a 600psi buffer zone to help with faster recharge. on the other hand, with a 450psi tank, you only have a 200psi buffer zone.

yea will u really know what ur talking bout and i was worndering if u know alot or anything about spyder rsx cause i have a question with my gun

DFSniper
05-14-2009, 06:20 PM
not the RSX in particular, but i may be able to help.

bigred76
05-14-2009, 08:17 PM
Type slower and more clearly and we will be able to help you more concisely. You also do not need two threads on the same issue. ;)

You RSX will work just fine off the LP output tank (puts out approximately 450psi), but it's really pushing it with a Spyder unless it's a really good, high-flowing tank regulator (most on the market are nowadays).

Another thing, asking a member if he knows what the marker is is kinda counter-intuitive as he just replied to your question. If you have a question about the marker, just ask it.

Modded-Like-Hell
05-15-2009, 06:13 AM
Type slower and more clearly and we will be able to help you more concisely. You also do not need two threads on the same issue. ;)

You RSX will work just fine off the LP output tank (puts out approximately 450psi), but it's really pushing it with a Spyder unless it's a really good, high-flowing tank regulator (most on the market are nowadays).

Another thing, asking a member if he knows what the marker is is kinda counter-intuitive as he just replied to your question. If you have a question about the marker, just ask it.

damn! you took the works right out of my mouth

lordvader952
05-15-2009, 02:03 PM
not the RSX in particular, but i may be able to help.

well the problem is it stoped shooting.I dont know the name of the part but the silver part that pushes up on the thing to make it fire stop going up and i dont know if its with the board or the wire that connects them
ill try to get an image of it