PDA

View Full Version : 2007 E-Trigger Frame - Incompatible w/ Many Triggers?


squizzi
05-10-2009, 10:13 PM
A little while ago I bought the 2007 E-Trigger Frame for my 07 Xtra. As much as I enjoy the added performance, I'm not a fan of the trigger design. I purchased a Check-It Sweet Spot awhile back .. it fit fine, but I had a big problem with it .. it the back end wasn't long/large enough to hit the micro switch/push it in.

If you own this frame, you'll notice the switch is in an odd place, much higher then most switches on other frames making it very difficult to find a trigger that will fit and work with the switch.

My question is:

Does anyone know what triggers will work with this frame? Please link me to anything and I'll look into it. Any help is appreciated.

(I'd really like a new trigger so I can survive a little longer before my marker upgrade..)

ferret15
05-10-2009, 10:19 PM
post a pic of your trigger, probably a mr/vs style trigger

squizzi
05-11-2009, 09:26 AM
http://www.compulsivepaintball.com/mmCOMPULSIVEPAINTBALL/Images/spyder07eframe.jpg

ferret15
05-11-2009, 10:04 AM
yep, get a MR series trigger for a 100% direct fit or a VS trigger for a 99% fit because you will have to adjust the screw.

squizzi
05-11-2009, 01:39 PM
Thanks for the reply ferret.. but that's not my problem, the MR series triggers fit fine, they just don't hit the microswitch fine.

I tried this trigger at one point:
http://static.zoovy.com/img/zephyrsports/W413-H262-Bffffff/trinity/trinity_mrtrigger_black.jpg

And it fit perfectly, I like the style, but it didn't hit the switch at all.

bigred76
05-11-2009, 03:20 PM
Did you adjust the activation point set screw?

ferret15
05-11-2009, 03:42 PM
Oh i almost forgot, the micro switch orientation is important, The lever needs to point up for the Mr triggers. The vs has 2 adjusters on the trigger so you don't need to worry just adjust.

Bigred- it needs the second adjuster screw to hit a micro switch.