PDA

View Full Version : Vertical Adapter


JumboNuts
05-07-2009, 09:11 PM
There are 2 o-rings on it that are #015 80D. I put on new ones and it leaks a lot, the #09 rings. The old ones were all cracked. Is the part defective? it was working for some time. the gun is 3years old only use 5 times :confused: :confused:

ferret15
05-07-2009, 09:35 PM
on the outer most o-ring, replace that with a tank o-ring

on the inner o-ring i recommend saving you tank o-rings and just buying a faucet oring from the hardware store.


oh o-rings dry up and need to be lubed up or replaced to continue to hold a seal. I suggest you buy some paintball oil and re-lube your entire gun accordingly so its ready to go with out the worry of it breaking.