PDA

View Full Version : alright NOW i know wat i want


pballer113
04-18-2009, 05:58 PM
ok instead of 14in im gonna go with a 16in barrel

-J&J 16in ceramic barrel
-MR series riser/rail
-Daisy 3/8in dovetail scope
-trinity locking feedneck
-MR car stock
-
http://www.actionvillage.com/061-187-0014
and that
itll take alot of work (i pay for my own paintball) and time but ill get it eventually

ferret15
04-18-2009, 06:04 PM
you should buy and VS2 and put all that stuff in your mr1

pballer113
04-18-2009, 06:43 PM
wat?
i should buy a VS2 and put the stuff that comes with it on my MR1?
i dont understand

Jonathan James
04-18-2009, 06:52 PM
ferret15 i have no idea what you mean?

sneekypete
04-18-2009, 07:43 PM
I also don't know what you mean Ferret.
Let us know how it goes there pballer113

ferret15
04-18-2009, 08:09 PM
well since you don't like to use your imagination

make your mr1 LP for starters, then electronic trigger and drill for eyes. but if you partial to the mech trigger you wont shoot to fast and probably wont chop to much.

bigred76
04-19-2009, 12:52 AM
Ferret... lawl. I understand you just fine. ;) Not a bad idea, but I think that's more than what he wants.

Car stock, sight rail, and sight are worthless for improving the marker's performance. I'd buy the rest of the stuff first and try out the marker like that. If it's still unsatisfactory as far as aiming goes, go ahead and pick the stuff up, but beware: you're shooting an inaccurate projectile and that means that it will not always go where your sight says it will go, thus making it pointless and an inhibition to your line of sight with the target.

pballer113
04-19-2009, 05:12 AM
yea i know but the scope and sight rail are kinda just for cosmetics but idk cause when i first shot my MR1 i could hit a pot from 50 yds away in 2 shots
and i would like the car stock because i like havin the stock on during speedball (its more accurate for me) but sometimes the stock on the MR1 is a little to long so i want the car stoock bcuz i could shorten the length of the stock bcuz its 6 position so yea:D
thanx guys
i think im gonna pick up the barrel first then the feedneck then the HPAtank/VLforce package

sneekypete
04-19-2009, 09:11 AM
I took my car stock off of my MR-2 because there was not enough mask clearance but I think the the MR series rail you should be OK but I would make sure before you buy it.

bigred76
04-19-2009, 11:17 AM
Shoulder your tank instead of purchasing a stock, if that's your reason. Try it without it before you buy something you don't really need.

irishwarrior
04-19-2009, 11:57 AM
I personally prefer a stock to help stabilize the marker, I usually run remote but when I'm not I don't find the tank is at a comfortable angle to brace the marker against.

pballer113
04-19-2009, 02:36 PM
i have a remote line setup so the stock isnt that reason

pballer113
04-19-2009, 02:39 PM
I personally prefer a stock to help stabilize the marker, I usually run remote but when I'm not I don't find the tank is at a comfortable angle to brace the marker against.

yea me either