PDA

View Full Version : lost a screw


spoonie
04-17-2009, 06:43 PM
Out shooting paint to break in my new ACP bolt and timmy detents. Being a newbie I forgot to check bolts tight! MR2 quit shooting... After several WTF's I discovered I was missing a screw that holds the frame on (rear one). I replaced it with the one that holds the stock on. Where can I get some replacement screws? No pro shops anywhere near.

Modded-Like-Hell
04-17-2009, 06:47 PM
check www.macrolineguy.com he might sell them

spoonie
04-17-2009, 07:17 PM
Thanks for the quick response, MLH. My only online link is my blackberry and his site loads up funky. I'll have to keep lookin'

slim and shady
04-17-2009, 10:11 PM
Or just contact kingman

dizzy
04-18-2009, 10:40 PM
If they're the same type of screw as other Spyders (non-VS), then this would probably work:

http://firstcallpaintball.com/store/show/115072

It says they're out of stock, but usually they have stuff like that on eBay, so a phone call to them would be a good idea.

If not, like shady said, contact Kingman.

j053
04-19-2009, 05:56 PM
try this place http://www.sundragonpps.com/paintball_spyder_repl_parts.html

OneShotKill
04-21-2009, 09:29 PM
or go to a hardware store and see what you can find...they should have one/some...

bigred76
04-21-2009, 11:06 PM
Spoonie, view this list them decide which you need: http://www.spyder.tv/forums/showthread.php?t=223

Go down to your local hardware store and ask them for that screw.

spoonie
04-22-2009, 06:46 AM
Thanks, all. I got a screw from the hardware store. It is shiney with a phillips head but it will work and cost me only 10 cents.

bigred76
04-22-2009, 12:04 PM
You can always put some masking tape on the threads and spray paint the head black. ;)