View Full Version : Installation

03-24-2009, 02:51 PM
Can anyone walk me through how to install the musashi 7 chip

03-24-2009, 02:54 PM
Take off the grip on the side that the chip is. Take off the battery after ensuring the marker is "off." Pop out the stock chip with tweezers, and be careful to pull it straight out and not bend any prongs, otherwise you can't sell it or keep it for a backup, it'll be trash. Push the new chip in in the proper fashion, just like the stock chip was in. If there is a dot to denote a specific corner, make sure that the chip gets orientated so that the dot is where the stock chip had its dot. Close 'er back up.

03-24-2009, 03:00 PM
It's still not coming out

03-30-2009, 08:51 PM
it shouldn't be glued in, just make sure that it not coming out at an angle, it should come right out.

03-31-2009, 12:06 PM
^^^ what that guy said. no angles,

its pretty simple its a plug and play upgrade and after you finish reading the manual on each individual mode and how they interact with the gun you will be happy you purchased it.