PDA

View Full Version : Best front grip/expansion chamber


mrpain
03-10-2009, 08:52 AM
Ok I dont really need an expansion chamber but a tube type replacement of the stock foregrip.

One that maybe has an inlet at the bottom/side... what will I need to screw in the body so that if I fall on it it wont strip the threads out.

oldironmudder
03-10-2009, 09:06 AM
You could always weld the stock forgrip to the body. If that broke it would be because of a crappy weld.


You could goto a local machine shop & have them wipe you up something that screws into the factory airline hole then uses the factory holes for the forgrip on top of that. Could build a brace that mounts to the stock forgrip & attachs to the bottom of the frame.

I could keep the ideas rolling but Im not......

sonik
03-10-2009, 10:11 AM
Get a lapco spyder vertical ASA and a gas through grip. The MR1 body adapter will fit into the gas through grip perfectly and i think will do what you are asking.

Here are links to ebay for the two parts: Lapco vertical ASA (http://cgi.ebay.com/PAINTBALL-BRAND-NEW-LAPCO-VERTICAL-ASA-ADAPTOR-SPYDER_W0QQitemZ250352812169QQcmdZViewItemQQptZLH_ DefaultDomain_0?_trksid=p3286.m20.l1116) and Gas through grip (http://cgi.ebay.com/PMI-Gas-Thru-Rubber-Grip-Paintball-Upgrade-Part-Clear_W0QQitemZ330261302291QQcmdZViewItemQQptZLH_D efaultDomain_0?_trksid=p3286.m20.l1116)

Ok I dont really need an expansion chamber but a tube type replacement of the stock foregrip.

One that maybe has an inlet at the bottom/side... what will I need to screw in the body so that if I fall on it it wont strip the threads out.

mrpain
03-10-2009, 10:13 AM
I'm not talking about a custom job, I'm talking about something like an expansion chamber but with its inlet not at the bottom..

I have just found a deal that mounts to the body with a raidas and all, then you can screw on what ever you want... now to find the EC !

sonik
03-10-2009, 10:34 AM
Expansion chambers are the pits... get a stabilizer. better in the long run and you will not frustrate yourself with the liquid CO2 in your marker hassle....

I'm not talking about a custom job, I'm talking about something like an expansion chamber but with its inlet not at the bottom..

I have just found a deal that mounts to the body with a raidas and all, then you can screw on what ever you want... now to find the EC !

mrpain
03-10-2009, 10:35 AM
Stabilizer............ I'm off to look for some...

BYUrdneck
03-10-2009, 10:00 PM
Get a Palmer's Male Stabilizer and a vertical ASA adapter. The male stab has the airline coming out of the side and not the bottom. Its better than a standard expansion chamber, but it is pricey. You could go with just a expansion chamber that has the air line on the side - that is cheaper.
Cheap ASA adapter - http://cgi.ebay.com/Spyder-Java-Gun-Vertical-ASA-Tank-Adapter-Stainless-1-8_W0QQitemZ350175818357QQcmdZViewItemQQptZLH_Defau ltDomain_0?hash=item350175818357&_trksid=p3286.c0.m14&_trkparms=72:1728|66:2|65:12|39:1|240:1318|301:1|2 93:1|294:50
Palmers Male Stab - http://cgi.ebay.com/Palmer-Male-Stabilizer---Black_W0QQitemZ330311064899QQcmdZViewItem