PDA

View Full Version : top cocking knob


applesauce
03-11-2006, 09:05 AM
how in the devil do i get that top cocking knob out!!!! i would like to clean my gun at some point but this is making it kind of difficult!

vikingshadow
03-11-2006, 09:18 AM
Just pull it straight up and out. It might take some pulling. Sometimes there's a hole on the back of the bolt with a grub screw in there that you have to loosen before you can pull the pin.

ooglieboogliebob
03-11-2006, 09:44 AM
hmm.. the electra knob should just pull right out .. just yank with all your life .. or try a wrench :)

druid
03-11-2006, 01:44 PM
lay a towel on the marker and use a cat's paw (small prybar) and torque it straight up. Don't bend or twist it

ooglieboogliebob
03-11-2006, 03:57 PM
yep if you bend or twist it it'll bend the knob ... and then you'll have to buy or make a new one

EstebanFR
03-13-2006, 04:33 AM
Hi, an easy solution to put the top cocking knob out:
just put a little bit of drip of oil on the cocking knob. twist it for some second, and take the cocking knob out with your hand! no need to use a tool!
then before to put it in, clean the hole in your bolt, put 1 or 2 paintbll's drip of oil, and then ut your cocking knob in your bolt!

sorry for my english, i am french.

regards