View Full Version : under slung co2
Does any one know of a kit or some way of modding my MR1 so that I can have the co2 mounted under the barrel instead of at the back?
slim and shady
02-04-2009, 07:29 PM
There are alot of ways you could do it make a braket that ataches to the barrel or forgrip to hold your asa and get the appropriate size braided line or macro to fit the distance. Its more really about what works for you rather then how to do it.
Why do you want it under the barrel?
I want it under b/c that would look bad ass and I cant stand a remote line. I also want to use a stock
02-05-2009, 09:34 AM
I've seen stocks that actually conceal the CO2 container in them not sure if it will fit the MR series guns though...
towards the botttom
kind of pricey though.
02-05-2009, 10:59 AM
That stock wouldn't work for a spyder, the air systems are laid out much differently.
02-05-2009, 11:30 AM
what you could do is go to a local hardware store and find a male/male 1/8" npt brass adapter (http://www.toolorbit.com/Brand/Air-Locker/Air-Locker-A1266.html) - take off the fake mag and airline - attach the adapter to the marker where the airline goes into the gun - find an ASA that has a port for an airline on the side rather than the front (like the stock MR1) and screw it into the other end of the brass adapter and tighten it so that the end where the tank screws in is facing forward - screw in your tank and there you go. Be sure to use teflon tape. I wouldn't use a big tank like a 20 oz because of weight, so try to use a smaller one. Before you do anything - line up everything to see if you have clearance for the tank - that it doesn't hit the gun or the reservoir plug. It might not even work out if the tank will be in the way of stuff.