PDA

View Full Version : HELP on removing gas thru grip


fatkidfrompbaz
01-06-2009, 05:08 PM
can some some one help me remove it, i've been trying for days but it's stuck:(

shunut
01-06-2009, 05:10 PM
Can you drive? If you can, bring it over my house, I'm in Gilbert.

Modded-Like-Hell
01-06-2009, 05:17 PM
did u read the manual?

twist the rubber fore grip counter-clockwise to release off the vertical adapter

if it helps...take it off the macroline first and then spin it...

http://www.spyder.tv/section/support/manuals/vs2.pdf

fatkidfrompbaz
01-06-2009, 06:05 PM
did u read the manual?

twist the rubber fore grip counter-clockwise to release off the vertical adapter

if it helps...take it off the macroline first and then spin it...

http://www.spyder.tv/section/support/manuals/vs2.pdf
yes i have read the manual

Can you drive? If you can, bring it over my house, I'm in Gilbert.
i can drive and no permit

Modded-Like-Hell
01-06-2009, 06:11 PM
so did it come off? check if theres a set screw on the top under the rubber on the fore grip?

fatkidfrompbaz
01-06-2009, 06:21 PM
nope theres no set screw

TheDarkShadow
01-06-2009, 06:28 PM
strap wrench & WD-40?

Modded-Like-Hell
01-06-2009, 06:38 PM
then what the hell?maybe it had loctite on it and u have to twist a lil harder or it has air in it? make sure all the airs out of it dryfire it without the tank on it

fatkidfrompbaz
01-06-2009, 06:40 PM
locktite maybe, air, i havent shot it once

TheDarkShadow
01-06-2009, 06:55 PM
are you gonna throw away the gas thru then just get a pair of vise grips then twist on that *****

Modded-Like-Hell
01-06-2009, 07:18 PM
it shouldnt be that hard

D4RKKNIGH7
01-30-2009, 11:52 PM
well if you haven't got it off yet try taking the macro line off the bottom of it so now its just a grip

then

put on some rubber gloves grab the top of the grip (the plastic bit, not the rubber bit) with the most inner part of your thumb and finger

then

twist the absolute S**T out of it

Hope This Helped

If You Don't Have Rubber gloves then try this with out

also something that might make it easier before you try spray on some WD-40 or some sort of good oil

fatkidfrompbaz
01-31-2009, 04:11 PM
finally it came off, now my vs2 looks good now:applause: