PDA

View Full Version : T-Board problems?


RainInBlood
12-23-2008, 07:37 PM
So i just got my vs2 with t-board and everything was working great. Well i decided that the trigger had too much side to side play so i began to a put a shim it in....I took the frame off and disconnected the eye wires from the board. Put the shim in blah blah blah. So i put the frame back on and plugged the eyes plug back in. It all works great till i turn on the eyes.....they function fine. Except when they are on, the gun won't fire faster than like 5bps?! Turn them off and the gun fires fine. Any ideas?

TheDarkShadow
12-23-2008, 07:44 PM
are they plugged in all the way?

RainInBlood
12-23-2008, 07:46 PM
Yeah its down in there pretty good

ferret15
12-23-2008, 08:05 PM
could you have pinched the eye wires?

RainInBlood
12-23-2008, 08:11 PM
thats what i was thinking , i was pretty careful with them but i guess its possible. any other ideas just incase

ferret15
12-23-2008, 08:14 PM
sorry bud.
next best thing
http://scenariodreams.com/manuals.htm

DFSniper
12-23-2008, 08:16 PM
email damon and see whats going on. i heard hes a great guy when it comes to customer service.

RainInBlood
12-23-2008, 08:29 PM
Sent , i'll let you fellaz know what he says just incase anyone else gets this problem in the future

extrabonez
12-24-2008, 10:55 AM
idk if u are..but are you using paint and air? becuase if not that may be the problem with your eyes on hope this helps

RainInBlood
12-24-2008, 06:26 PM
Well guys .....it done fixed itself! :confused: :confused: Weird. I turned it on again and turned the eyes on and it fires fine .Oh well thanks for the help!

DFSniper
12-24-2008, 07:08 PM
lol, second board/eye problem that magically fixed itself in the past half hour!