View Full Version : Is this a good upgrade, or even a possible one?

Paintball Freak
12-15-2008, 09:43 PM
I found this Valve and was wondering if it would make much of a difference in my VS2 with my VS1 bottomline internals?

I don't want to spend 25 dollars if it won't make a noticeable difference, or if you know of a better valve thats close to the same price as the one in the link...

T h a n k s

12-16-2008, 05:30 AM
yes, very good. but you can get them for cheaper: http://iisports.com/product.asp?s=iispaintball&pf_id=XP7915A-VALVE&dept_id=3202

Paintball Freak
12-16-2008, 04:17 PM
I'm not on a very tight budget, I've just been meaning to upgrade my bottom internals into an LP marker for awhile...
Is there anything else that you would recommend to turn my marker into an LP marker?

12-16-2008, 04:20 PM
get a reg. other than that, theres not many options for the vs1

12-16-2008, 04:37 PM
i got that once on my first LP spyder and it never worked...changed the o-rings and still didnt work...i ended up getting new designz high flow valve. it was like 20 bucks new... and its way better quality

Paintball Freak
12-16-2008, 06:53 PM
Sorry I meant to say... I have a Spyder VS2 with the Spyder VS1 bottom tube internals...
And what about MINI Strikers?

12-16-2008, 07:15 PM
i used the stock striker and it worked good... if i remember my gun shot at like 286 fps @ 225 psi...but i also had a spyder esprit fully modded out

12-21-2008, 10:39 AM
( mini striker)all's I have done is polish mine with 1500 grit. my VS 2+ mods(listed below) runs at 290fps at 210psi at 15bps But we have different valves so not shure how much this helps

Paintball Freak
12-31-2008, 12:52 PM
Edited first post with new valve idea, check it out

01-01-2009, 12:38 AM
yeah New designz valve is good

01-10-2010, 04:17 PM
DF is the valve from iisports able to be used in the vs series?? According to the claims on the site its for mech markers only, any truth to this rummer on that valve and also has anyone used this valve in an lp setup and had success with it?? PM me with details as well please!!!