PDA

View Full Version : Air Tank doesn't Screw on properly


nysheepy
11-25-2008, 06:31 AM
I have a Spyder TS. It comes with a mini drop forward.

My problem is when i try to screw on my N2 tank, the fill nipple is in the way because it protrudes from the tank and knocks into the drop forward / grip.

Last time i played I unscrewd the asa, atttached the n2 then screwed the n2 back. But when I did the same thing to unscrew, the housing for the hose came loose.

there needs to be an easier way around this. I'm thinking another asa or drop forward? Any suggestions of which to buy?

Thanks!

DFSniper
11-25-2008, 06:33 AM
i like my Unimount, eve if it is a bit ugly. another really nice one is the Dangerous Power RAPS on/off or the New Designz quick-flip.

Ace24
11-25-2008, 08:47 AM
CP ON/OFF with a Rail. Don't go the drop direction unless you've got a 112CI tank.

The CP On/Off ASA is by far the top of the line in ASA's. You can find them used for pretty cheap.

TheDarkShadow
11-25-2008, 05:37 PM
you could probably just take off the drop forward for the time being and put on just the asa

Ace24
11-25-2008, 07:16 PM
The stock drops are inline screws. The ASA's have that stupid diag screw set.

TheDarkShadow
11-25-2008, 07:21 PM
The stock drops are inline screws. The ASA's have that stupid diag screw set.

I believe the TS is the newer gun with inline screws

nysheepy
11-26-2008, 09:28 AM
I'll try to mount just the asa onto the handle. My concern is what if the steel braided hose line doesn't reach that far? I'll update after I try it.

Happy Thanksgiving All.

Lybster
11-27-2008, 10:29 AM
I've had the same problem. Check with Kingman, I beleive they have a new ASA to replace the original one to allow a better fit for HPA tanks.