View Full Version : Need some parts indentified
11-09-2008, 06:42 PM
any one know who makes this stock.
i like how it sits down more then the other car stocks.
i really dont like the look of the car stock on the mr2 but with a mag kit it looks proper
oh and anyone know what iron sights those are
11-09-2008, 06:49 PM
The shroud (rail, fore end and sight) are a modified A5 ump kit from OPSgear (http://www.OPSGEAR.COM/Tippmann-A5-UMP-Kit-Folding-p/og-a5-ump-kit-folding.htm). The stock is probably from there too. But i looked and they don't show a spyder m4 stock on their web page. You can look at RAP4. they have m4 stocks. Here is the link for just the front site.
Here is the rear site.
11-09-2008, 06:59 PM
Rap4 has then higher mount stocks. Or so the pics make it seem
11-09-2008, 07:13 PM
Then it might be this one, since it comes with a spring kit. It must go in place of the RVA
it could also be any of the stocks on the market, but it was modified to fit in the RVA instead of the stock hole.
11-09-2008, 07:17 PM
that might be it , thanks man .
What iron sight do you guys think are best/useful. the UMP sights look far to precise. I would like some thing open. might end up with m4/m16 stuff i guess.
thanks foe the quick replies
11-09-2008, 07:18 PM
oh man, that stock looks familiar. i cant remember the brand, but its listed on PBReview.com...
11-09-2008, 07:22 PM
On trinity there is a mr stock but it uses the stock mounting location.
the one posted looks to be a general spyder stock. not sure if that works still
11-09-2008, 07:24 PM
At first I thought it was a real M4 stock just machined, since its so thick where it attaches. but after looking at some on the web sites i see most are that size. No problem, check out opsgear, trinity and specops. They have plenty of sights that you can use.
11-09-2008, 07:29 PM
11-10-2008, 02:17 AM
Here is what you are looking for...
11-10-2008, 02:51 AM
yep, thats the one i was thinking of.
11-10-2008, 05:00 AM
Bingo :) thant the one
Thanks a lot man .