PDA

View Full Version : MR1 reg?


QuiGonKen
03-01-2006, 07:32 PM
does the MR1 come with a regulator?

Voodoo27909
03-08-2006, 09:29 AM
no

ooglieboogliebob
03-08-2006, 12:33 PM
nope ... only a few spyder gun comes with a regulator i believe.. Fenix and the Rodeo qualify as on .. even still the quality isn't that great

PWNDuAgain
01-04-2007, 12:12 PM
You dont need a regulator anyway. They are over rated. Look at the Tippman's they don't have regulators and work great!

Hob Hayward
01-04-2007, 07:34 PM
Reg's are great to have. don't listen to MR. Tippmann obsessed here, hes biased. Not that the rest of us are biased towards spyders or anything ;). Stock tippies and stock spyders are comparable in performance.

yamaha cow
01-05-2007, 05:58 PM
yah if u want a reg on your mr1 u can get a vertical adapter from hardware stores paintball pro shops and online I think tapco or something makes them.

Ace24
01-12-2007, 10:56 PM
nope ... only a few spyder gun comes with a regulator i believe.. Fenix and the Rodeo qualify as on .. even still the quality isn't that great


It wasnt a "reg."

All it was, was a gas through chamber that simulated a reg only in looks. No Spyder comes with a reg. (The VS's have what they call a "reg" but it's more of a ASA/reg.)

I used to have a Fenix. :) There was no way to control the amount of air that passed through the gas through chamber. Therefore it is not called a regulator.

Putting a regulator on an MR1 is pointless. You cannot make a MR1 low pressure without some SERIOUS modding to the body it's self. There is no LPC, no VA, and no place to put either of those. There is also no way to screw in a regulator. You can, however, put in one of the old style male threaded gas through chambers on it, substituting for the metal "shroud" that goes around the hose that leads into the body.

cyberthrasher_706
04-30-2007, 05:30 PM
what about using a tank regulator?

Ace24
04-30-2007, 06:58 PM
What do you mean? HPA tank's have regs on them just to lower the outgoing pressure to 800PSI (for high pressure and I think 400 for low).

Hob Hayward
04-30-2007, 07:08 PM
Ah, but you are wrong Ace, there were several spyders with bottomline regs. Including the rodeo and fenix.

Critical
05-01-2007, 05:41 AM
MR series is just as easy to LP as any other Spyder. Sundragon proved that fairly well with their MR2. MR1 would be even easier.