PDA

View Full Version : Vs2 Tadao Board!!??


Zues
07-24-2008, 12:32 PM
Hey i just got a tadao board today in the mail and i dont know where to get it installed! I dont have any local paintball shops where they can do it. What are my options?

DirtySouth
07-24-2008, 02:27 PM
Ummmm...Do it yourself...It's not hard..At all.

1) Open your grip and take out the battery.
2) Remove all the wires from the original board.
3) Take out the screws that hold the board in place.
4) Use the same screws to put in the Tadao board.
5) Re-connect all the wires.
6) Plug in the battery.
7) Screw your grip back on.
8) Kill noobs.

Hazmat13
07-25-2008, 10:15 AM
:yeahthat: but before you go and kill noobs, make sure everything is working, and adjusted to your likings ;)

-Josh

Zues
07-30-2008, 03:26 PM
im not good with wires

faithalone
07-30-2008, 03:34 PM
there is really no wires you have to mess with... its all just plug and play really... noid wires, battery wires and trigger switch wires.. just unplug from your old board and replug in on your tadao... very easy... you can do it... you can do it all night long :)

Zues
07-30-2008, 06:26 PM
Wait so can I charge the 9.6 volt battery directly though the port with the tadao board? Also will a regular 9 Volt battery work proprely with the tadao board?

Zues
08-10-2008, 10:36 AM
ALSO well i put in the tadao board and went into the fields yesterday. I was nailing people. BUT whenever i walk the trigger the gun cant keep up with my pace... it was only shooting like 10 bps and that was on semi auto UNCAPPED.. a little help...

DirtySouth
08-10-2008, 11:21 AM
Mmmm....Were the eyes on or off?

Zues
08-10-2008, 02:20 PM
it said the eyes didnt work but they weren't pinched or anythign... is it a problem with the eyes then?