PDA

View Full Version : PMI Problems


XSiv Force
07-10-2008, 11:26 AM
Does anyone have a diagram for a pmi pirahna? If so post it please.

If not, What the heck is up with my pirahna when air is coming out of the trigger

XSiv Force
07-10-2008, 11:56 AM
http://i304.photobucket.com/albums/nn200/XSiv_Force/momscam082.jpg

And this is its brother

http://i304.photobucket.com/albums/nn200/XSiv_Force/momscam080.jpg

For some reason i can not figuer out the problem

The Pumper
07-10-2008, 12:01 PM
Check the oring on the hammer.

XSiv Force
07-10-2008, 12:04 PM
i dont think thats it because i took the entire bolt and hammer system out of each gun and replaced them with each opther and it still happened to the black one.....Could it be the valve

The Pumper
07-10-2008, 12:07 PM
Did you check all the orings?

XSiv Force
07-10-2008, 12:11 PM
yep all arte new or in good condition

EDIT: Found out the issue from PBnation it is in fact what i thought it was exactly the Valve well sort of the Valve O-Rings. NEW QUESTION: HOW DO I GET THE VALVE OUT?!?!?!?!?!?

vikingshadow
07-10-2008, 05:17 PM
Assuming it's similar to a spyder:

Take the grip off and there should be a brass screw (or regular one) towards the front on the bottom tube that holds the valve in place. Unscrew it.

Remove the hammer and spring assembly from the back, then remove that big honking thing in the front. Take a battle swab, or a wooden spoon and put it in bottom tube at the back of the gun - push the valve out the front of the gun.

To reassemble, go in reverse of what I told you.

The Pumper
07-10-2008, 05:18 PM
Yep. Battle swab is what I use. Works like a charm!

XSiv Force
07-10-2008, 05:19 PM
alright thats what thought, i just cant seem to get the back screw to the trigger off of the gun so the trigger frame wont come off....im going to have to hack or dremil it off

TheDarkShadow
07-10-2008, 05:48 PM
alright thats what thought, i just cant seem to get the back screw to the trigger off of the gun so the trigger frame wont come off....im going to have to hack or dremil it off

WD-40 is your friend

XSiv Force
07-10-2008, 05:49 PM
nope tried WD, Liquid Wrench, oil.....it wont come out so since the actual triger is NOT threaded for the screw im able to hack it off and just slide the frame off