PDA

View Full Version : Asa


Angelitopr12
07-09-2008, 06:04 PM
Does the VS2 ASA need an o-ring?:confused:

MonsterLopes
07-10-2008, 09:22 AM
Be aware that the VS2 will bleed air in the maximum off position.

Try putting your tank on with your marker with the ASA a 1/2 turn away from the off position.

Hazmat13
07-11-2008, 07:35 PM
Monster-Mine didn't do that :confused:

MonsterLopes
07-14-2008, 12:42 PM
If I keep twisting my on/off past the off position the pin actually stops retracting and starts extending again. When I reach my maximum off position, the pin is 20% entended. I always assumed it was some kind of bleed feature...

Hazmat13
07-25-2008, 09:17 AM
maybe on yours :)

Blue Spyder
08-27-2008, 06:49 PM
I agree with Monster. Thats is what I do. It maybe only for the VS2 or sumtin?

MonsterLopes
08-28-2008, 03:55 PM
I fixed it; ended up fitting a washer under the snap-ring. Now, when my ASA stops moving in the 'off' direction, the pin is completely retracted.