PDA

View Full Version : Stock


rjmartin19
07-07-2008, 03:33 AM
Does anybody know where to get a M4 buttstock for the MR2? I bought a barrel and buttstock kit from RAP4 and the barrel fit but the buttstock doesnt. I tryed calling them and they do not answer the return line.:mad: I am looking for a buttstock that fits the MR2 and i can use the stock screw so i can use my sling. Thanks for any help.

irishwarrior
07-07-2008, 05:18 AM
Did you put the stock in the velocity adjustment hole?

rjmartin19
07-07-2008, 06:07 AM
no i put the stock in the stock hole.

irishwarrior
07-07-2008, 06:20 AM
Try it in place of the velocity adjuster. I had the same issue with mine until I realized it looked suspiciously like my velocity adjuster.

slim and shady
07-07-2008, 06:31 AM
:yeahthat:

rjmartin19
07-07-2008, 07:21 AM
what do you do with the velocity adjuster? Sorry i am new to paintball and paintball markers.

slim and shady
07-07-2008, 07:31 AM
I have never used this stock but I beleive you just take it out and the stock replaces it. Of corse you leave the spring in but just take out the adjusted knob.

irishwarrior
07-07-2008, 08:08 AM
:yeahthat: And...

http://i281.photobucket.com/albums/kk214/irishwarriorking/Welcometotheforums.jpg

rjmartin19
07-07-2008, 09:31 AM
another ?, if i put it where the velocity adjuster is how do i keep it from just coming back out. I have a sling on my mr2 so i dont have to lug it around and with out a screw or something i imagine the sling will just pull the stock out.

rjmartin19
07-07-2008, 09:31 AM
oh yea and thanks for the welcome!

Ace24
07-07-2008, 09:42 AM
You probably have the same one I do.

I modded mine to fit the top tube by dremeling the bottom of it so that it would fit over the velocity adjuster and then tapped a hole in the top so that I could use the stock screws in the top of the frame.

The other way is to take out the pin that holds in the velocity adjuster, put this in its place, the put the pin back in.

rjmartin19
07-07-2008, 10:00 AM
ok thanks ill try that.

rjmartin19
07-08-2008, 05:50 AM
one more question. Will removing the velocity adjuster damage the marker? How do you adjust the velocity? Ok that was 2 questions.

irishwarrior
07-08-2008, 06:28 AM
No it will not damage the marker and in order to adjust the velocity either get a stock with an RVA or use different spring combinations. I find that the 32 degrees spring kit is handy just to have.

rjmartin19
07-08-2008, 07:44 AM
You probably have the same one I do.

I modded mine to fit the top tube by dremeling the bottom of it so that it would fit over the velocity adjuster and then tapped a hole in the top so that I could use the stock screws in the top of the frame.

The other way is to take out the pin that holds in the velocity adjuster, put this in its place, the put the pin back in.

Is the screw m4 thread? I am going to modify the stock so i can still use my sling without yanking the stock out when i let it hang.

irishwarrior
07-08-2008, 08:46 AM
If you put it in place of the velocity adjuster it won't come out with the pin in there, trust me. And if you're going Ace's route of tapping it what do you mean by M4 threaded? Which part?

rjmartin19
07-08-2008, 08:50 AM
I meant the thread size on the screw for the oem thread. The one you use with the factory stock.

Jungsa
07-08-2008, 08:52 AM
No it will not damage the marker and in order to adjust the velocity either get a stock with an RVA or use different spring combinations. I find that the 32 degrees spring kit is handy just to have.


:yeahthat: I think a spring kit is a very good idea. its up there with the timmy detens. One game my velocity just dropped. I threw in a tighter spring from a old piranah and it brought it back up to playable again.

bassmasta
07-11-2008, 07:24 AM
the velocity adjuster has a pin that holds it in.

Gren VTBC
07-15-2008, 11:34 AM
yo rj, I bought the same thing from them, and it shoulda came w/a sprink kit right? anyways it does go into the velocity hole, but you have to take a sanding tool ( I don't know the name of that tool)kinda looks like a screwdriver but shaves down whatever ur using it with, anyways shave the knotch where the velocity pin pushes in from the side or you marker to lock in place and that should do it and don't forget to swap ur stock spring with another one they are color coded