PDA

View Full Version : Will this offset work on my MR1?


Natman
07-02-2008, 09:10 AM
I already have the tactical rail/handle which uses a 3/8" dovetail. I want to get goggle clearance for my red dot sight without cutting my stock.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=250257848257&ssPageName=STRK:MEWN:IT&ih=015

cyberthrasher_706
07-02-2008, 11:31 AM
yeah, if you have a 3/8 dovetail already there shouldn't be a problem. For future reference, the rail on the MR-1 is 7/8". Why not just mount it straight to your handle without offsetting it?

Here's JCS' sight
http://www.bp-usa.com/accessories.htm (http://www.bp-usa.com/accessories.htm)

Natman
07-02-2008, 12:07 PM
Because I need better mask clearance! I find it's just about right when I hold it next to the handle and furthermore, it's a 45mm sight which mounts to a 7/8" rail unlike smaller ones which use 3/8". So I need some kind of rail adapter anyway. (yeah I could not use the handle and mount to the marker but then I really have to cut the stock and I happen to really like the Mr1 stock :))

cyberthrasher_706
07-02-2008, 06:27 PM
I think you may be the first person in history to like the stock as it is.

Darcman
09-10-2008, 09:51 AM
you gonna have 2 cut the cocking bolt to fit the offset on the marker

Taillo
09-19-2008, 01:59 PM
This offset will work on top of the carry handle and you wont have to cut anything because you can put the handle on the mr1 without cutting anything.