View Full Version : Using a regular 9v?
06-11-2008, 02:13 PM
ive read somewhere that there is a way to use a regular 9v instead of kingmans 9.6v. is that true? and if so how would i go about doing that?
06-11-2008, 03:30 PM
I'm new to electronic markers, but my local shop assured me that it would work fine, just remember not to try recharging it or you'll blow the battery up.
06-11-2008, 04:04 PM
I was told by my local shop that it will work but you only get about 100 shots out of a reg battery. Not sure if that is true or not have not tried it.
06-11-2008, 06:25 PM
Sometimes it works sometimes it doesn't. You can try it in a pinch. At slower rates of fire you might get by with it, for a few shots but the 9.6 is what it really needs.
06-11-2008, 06:27 PM
If using a spyder e-marker, use the 9.6 battery that goes with your marker. Although I've never had problems with a regular 9v, that'll help your cause. ;)
You won't have too much success using a regular 9v in your Spyder with a stock board. In my Pilot I was able to use it for a while but with the MR2 it hardly lasted at all. Your best bet is to use the included rechargeable 9.6v.
slim and shady
06-12-2008, 06:46 PM
I have heard some people say that using a 9 will fry the stock board wial others claim that they use them without any problem. I know lots of aftermarket boards will also take the 9 volt. Personaly I would stick with the 9.6. Hope that helps
06-16-2008, 06:16 PM
nop it doesnt work i fried my 9.6 volt and u se a 9v it only gave me like 150 shots it doesnt work so dont waste money on it get a 9.6 its