PDA

View Full Version : Help With Air Leak


paintballinfool
06-07-2008, 08:33 PM
Last summer I put an eletronic rocking trigger on my Rodeo. For some reason I have an air leak. It sounds like it is coming out of the barrel. I have replaced all the o rings and oiled everything up but it still leaks and now I have no pressure. I cock my bolt and it won't shoot any balls.

bamf-hacker
06-07-2008, 08:42 PM
Take the gun apart and inspect the cup seal.

Most likely that is the issue. Replace it and you should be good to go.

paintballinfool
06-07-2008, 09:12 PM
I did that and it still leaks I am lost

florios
08-19-2008, 12:14 AM
you probable just need to lube it (not bike tire lube the thick greas kind of stuff) they should have some at your local paint store

florios
08-19-2008, 12:16 AM
also if you put the little circular thing that you popit goes through backwards when you took it apart that makes a nice leak through the barrel too

kramernator
08-31-2008, 06:00 PM
try shooting it when it is aired up, the striker may be pressing against the valve pin just a little so that air comes through, it does that on mine every now and then.

oh, and have you checked the o-rings on the valve, you need to take off the front block (thing with the gauge on it) and the striker (black thing on the bottom tube connected to the bolt) then use a pencil or something and push it out the front.