PDA

View Full Version : Don't hate me... (LP thread #956532174.3)


MonkeyWiz
02-25-2006, 10:56 AM
I have a Spyder Victor and I intend to do the LP setup as follows:

* WGP ERGO (280fps) ~70$
* Madman spring kit ~10$
* Modified stock bolt (286fps) Remove venturi and polish ~0$
* Modified stock vertical adapter (283fps) Open up holes and polish ~0$
* Modified stock valve (285fps) Open up airflow and polish ~0$
* Modified stock valve pin (280fps) Grind of excess and polish ~0$
* Modified stock striker (283fps) Grind of excess and polish ~0$

I live in an area where it is hard to get refills on both HPA and CO2 so I will buy a quick change adapter for 12g CO2 cartridges.
12g cartridges I can buy everywhere and I only go mechanical anyways.

Now: What have I forgot? Any comments?

druid
02-25-2006, 12:56 PM
spring kit...either a 32* kit or a Madman kit

MonkeyWiz
02-25-2006, 12:59 PM
spring kit...either a 32* kit or a Madman kit

Ah! I knew it was something. I'll bet I would find out sooner or (probably) later...

ooglieboogliebob
02-25-2006, 08:14 PM
hmm... springkits are only 10 bucks .. or you could probably find one cheaper online ...

DRAGON
02-25-2006, 10:14 PM
Now: What have I forgot? Any comments?

You're not going to like 12 grams in the paintball world of today IMO. They will in the long run cost you much more for less results. If you cannot find propellant locally get your own fill tank. You can either rent or purchase them. 32* spring kits are much better than Maddman kits.

MonkeyWiz
02-26-2006, 02:42 AM
Yeah, somebody told me I would get 5 shots per 12g at most.
I have always heard 25-35 shots, wich is enough for me.

I'll consider buying an old fire extinguisher and a fillstation.
But that is money I don't have right now. Cheapest extinguisher I found so far is 45$ and a fillstation for 50$ (Keep in mind, I live in Sweden)
I havent found anybody who sell it second hand and I have been looking for a year now. I will give the local fire station a call though. It could help.

32* is best you say? I trust you in that matter so 32* spring kit it is.
Thanks!

DRAGON
02-26-2006, 04:35 AM
That's what I made mine out of, an old fire extinguisher. You can make your own fill station if you can find the parts locally. Look here for details. (http://www.sundragonpps.com/paintball_make_c02_adapt.html) The only other thing you'll need to buy is a valve and you'll need to install a siphon tube as well. No biggy -