PDA

View Full Version : MR2 Upgrades


madmoje
05-22-2008, 03:30 AM
So far I have a MR2 with A M16 apex, bipod, 18 volt lcd fasta hopper, handle towards the back like the mr3 one, ak 47 expansion chamber, tactical stock, mr grips, and a tlock feedneck. What else should I get nothing to exspensive i want to spend mabye another couple hundred.

interceptorMR2
05-22-2008, 06:22 AM
have you gotten timmys yet? if you havent get those, only like 3 bucks on ebay. do you have a red dot?

madmoje
05-22-2008, 12:00 PM
no what are timmys I dont want a sight do you think I have a good setup

pb34
05-22-2008, 03:45 PM
He meant timmy detents. They are detents that replace the stock one and are stiffer and last longer. If you wanted to you could upgrade your internals and make your gun low pressure. That could be pretty expensive and pretty time consuming. You could also replace the board with an aftermarket one.

interceptorMR2
05-22-2008, 06:08 PM
yeah sorry, im a little used to the abbreviated version. Nice mods tho :D

madmoje
05-23-2008, 02:04 AM
oh its ok Im, quite new to paintball Ive played mabye 2 years but ive only been to like 10-20 k ill look at timmys but idk on the low pressure. Do expansion chambers really help so your co2 doesnt spike cause whenever my co2 gets cold after I rapid fire then it starts to go off and theres no really pattern its just all over the place.

irishwarrior
05-23-2008, 04:13 AM
Remote lines perform the same function as expansion chambers. Also, if your CO2 is really inconsistent you could get a regulator.

interceptorMR2
05-23-2008, 06:19 AM
For the timmys, just go to ebay and type in Bob Long Intimidator Detents, and you should get them. The stock detents in the MR2 sheer way too often, the timmy detents hold up alot longer, they are somewhat hard to cram into place, but in the end they are way worth it and fairly cheap.

slim and shady
05-23-2008, 08:11 AM
Why dont you upgrade to HPA?
Grab a ACP 2-oring bolt and snag a spring kit.

madmoje
05-23-2008, 11:25 AM
I dont know where to get it filled. On the ultimate paintball I was going to buy the mr t baord should I go with this or another and if will I need other stuff with it. Could someone plz give me the link for the timmy ball detent. Im going to buy a new board an ACP bolt and detents I got the ACP bolt but could someone help with the board and detenets.

SpyderMan723
05-23-2008, 12:13 PM
I've got an aftermarket board that fits the MR2. check out my sale in my sig

pb34
05-23-2008, 12:28 PM
http://cgi.ebay.com/BOB-LONG-INTIMIDATOR-BALL-DETENTS-10-pk_W0QQitemZ120032407508QQihZ002QQcategoryZ10554QQ rdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp1638 Q2em118Q2el1247

Here's a link to the detents on ebay.

madmoje
05-23-2008, 12:30 PM
Ty for the detents but Is the bolt on ultimate paintball do I need to buy other stuff for it cause I just spent 400 and I would like to only spend another 200 mabye but where could I get a hpa tank filled or a compressed air not co2

madmoje
05-23-2008, 12:32 PM
NVM on the board it comes with the pad u need and everything. So my guns gonna own lol just wish i could lol. On the bolt will it work with all stocks or just the stock stock. lol stock stock