PDA

View Full Version : vs3 eye problem


ChadHarper
05-20-2008, 07:56 PM
Okay so I can shoot the gun with the eyes off, but the gun will not fire with the eyes on. They are clean so I don't know what could possibly be wrong. I also checked the connection on the board.

DFSniper
05-20-2008, 08:01 PM
you may have pinched the wires.

ChadHarper
05-20-2008, 09:20 PM
Will I have to buy new eyes?
It's still under warranty will that cover it.

bigred76
05-20-2008, 10:48 PM
Is there paint in the breech? Are the wires "squished" at any point?

ChadHarper
05-21-2008, 06:45 AM
There is a ball in the breach. The wires got pinched a little I think(if so can it be fixed?). At the very end of the wire some of it's exposed, but it's a very small amount of wire exposed. (do you think it's shorting out

bamf-hacker
05-21-2008, 06:49 AM
you can take the board out and eye out and try them on the work bench to see if they are shorting against metal in the frame. If they are you should replace them.

ChadHarper
05-22-2008, 08:38 PM
I called kingman and I'm going to send it in on Monday. Thanks for the help guys!