PDA

View Full Version : Spyder RS drop forward


CSTAC
04-22-2008, 12:54 PM
Is there a drop Forward that will fit a Spyder RS?

DFSniper
04-22-2008, 01:09 PM
all of them, but you'll need a new hose.

CSTAC
04-22-2008, 04:02 PM
so with a new hose will I have to get new fittings into the in-line reg? thanks

SUNNYboi
04-22-2008, 04:09 PM
I had to take out the 90 degree fitting and put a straight one on the regulator so my macro line wouldn't crink because of the tight bend it had to make.

DFSniper
04-22-2008, 04:11 PM
so with a new hose will I have to get new fittings into the in-line reg? thanks

yes, i think the rs has a metric threaded reg, so you may need a metric to 1/8th npt adapter too, but i may be wrong.

Griff
04-22-2008, 05:23 PM
If you remove your asa you should have two STANDARD holes for your Drop forward.
Open your grip, Then back out the allen scew holding your asa on. If you are going to yous the stock asa your drop fowrand will need a dove tail to fit on.