PDA

View Full Version : Barrel mod


fatkidfrompbaz
04-04-2008, 06:10 PM
has anyone did a mod on a stock barrel???

DFSniper
04-04-2008, 06:12 PM
i've dremeled designs into one, and i've seen people cut designs out of the tip (i think...)

slim and shady
04-05-2008, 07:15 AM
The only thing i have seen barrel wise is custom shrouds and cuting the barrel to a shorter langth. other than that i dont think that I have seen or heard of anything different.

SpyderMan723
04-05-2008, 07:35 AM
I was thinking about making a few cuts on the tip of my stock barrel, kinda like a design that would match Doc's stinger body, like a stinger barrel.

DFSniper
04-05-2008, 07:37 AM
you have to remember that the barrel may not screw in exactly the same, depending on your barrel o-ring, so it may not line up right every time. after leaving my barrel on my gun, i took it off and put it back on, and got a whole 1/2 turn more since them. so my whole barrel was upside down. your best bet would be to make sure you have a small barrel o-ring.

slim and shady
04-05-2008, 07:53 AM
you have to remember that the barrel may not screw in exactly the same, depending on your barrel o-ring, so it may not line up right every time. after leaving my barrel on my gun, i took it off and put it back on, and got a whole 1/2 turn more since them. so my whole barrel was upside down. your best bet would be to make sure you have a small barrel o-ring.

Never had that happen befor! Good thing to because I think i would get a little annoyed at having to reajust my BT16 each time i put the barrel on!

DFSniper
04-05-2008, 07:55 AM
i think it all depends on size of your o-ring, and how long it can hold its shape (forgot the word for that...)

slim and shady
04-05-2008, 08:00 AM
yeah im not sure I just hope that i dont ever run into that problam i think that would start to get old real fast. The last thing anyone would want to do is have to rejust there shrouds and the like before they hit the feild

extrabonez
04-19-2008, 06:35 AM
i havent seen any but because ima big fan of .50 caliber sniper rifles ima try and make a muzzle brake that i slide onto the end of the barrel then it its or i might lock it down or something..

cyberthrasher_706
04-22-2008, 12:20 PM
I used to have that happen all the time, and yes, it did get extremely annoying. Funny thing, I never put that together. Good advice there.

Kenny_McCormic
04-22-2008, 07:25 PM
I have a 5 7/8" sawn off victor barrel.

irishwarrior
04-22-2008, 07:42 PM
i think it all depends on size of your o-ring, and how long it can hold its shape (forgot the word for that...)

Malleability?

king-man
04-23-2008, 12:46 PM
Malleability?

let me guess, your in the ninth grade? we just learnecd that a while back in physical science