PDA

View Full Version : MR2 setup


jacx3
03-31-2008, 11:59 AM
Is this a good setup:

MR2 w/ eyes
Egg 3 hopper
CCM Mid-Rise feedneck
16" J&J barrel
20 oz CO2 tank

Also, do i still need new detents or are the stock detents in the MR2 w/ eyes better than the original

SpyderMan723
03-31-2008, 12:51 PM
Is this a good setup:

MR2 w/ eyes
Egg 3 hopper
CCM Mid-Rise feedneck
16" J&J barrel
20 oz CO2 tank

Also, do i still need new detents or are the stock detents in the MR2 w/ eyes better than the original

Looks good to me. But if I were you i wouldn't take a chance with the factory detents, timmy detents are cheap anyway so I'd pick up a pack


PS:WELCOME TO THE FORUMS!

slim and shady
03-31-2008, 07:25 PM
First welcome to the forms, you are off to a great start with your MR2. Timmy detents are always a great choice, and well worth the few bucks they cost. I would also like to sugest to your setup HPA it is always a good idea with any gun with a high ROF to use HPA its alot esier on your marker. After that its pretty well costomising it tou your individual needs you have a great start. I would seriously consider HPA though.

jacx3
04-01-2008, 02:10 PM
are these the Timmy detents:

http://cgi.ebay.com/NEW-Timmy-Detent-Kit-Paintball-Intimidator-Detents_W0QQitemZ330149174699QQihZ014QQcategoryZ36 285QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l12 47QQcmdZViewItem

dynastykiller08
04-01-2008, 03:50 PM
yes those are the ones

Lonus
04-01-2008, 04:26 PM
You should be set to rock and roll. Can't go wrong with hpa if you can get it in your area. You might think about a remote.