View Full Version : imagine select
03-27-2008, 02:09 PM
i have a spyder imagine select and my bolt is jammed. its in the cocked position right now and when i try to shoot it, it acts like its uncocked. i took apart my gun and tried to push the bolt out, but it wont move. any suggestions
03-27-2008, 02:52 PM
Were you shooting paint? Is the battery fully charged? What bolt is this, stock?
03-27-2008, 02:59 PM
ya the battery is fully charged and i was shooting paint at the time. its a stock bolt and theres a thing sticking out of the side of the bolt that i dont know how to get off.
03-27-2008, 03:13 PM
Could you possibly get a picture of this thing that's sticking out the side of the bolt? I'm not remembering anything that should be there, so I'm going to go and double check the diagram and make sure of that.
Did a paintball get squished by the bolt of the gun and cause it to freeze up?
03-27-2008, 03:47 PM
its the thing that u pull back in order to cock the bolt. im not sure what its called. i lost my manual so i dont know how to get it off. It prevents the bolt from coming out so if i can get that off, i should be able to force the bolt out. it could definitely be a broken paintball that got stuck in there. i cant find the manual online or anything. you can see what im talking about if u look at a picture of the imagine select online.
03-27-2008, 04:18 PM
It unscrews I believe. Turn it counter clock-wise and it should come out that way.
03-27-2008, 04:42 PM
ya thats what i thought but ive tried unscrewing it and it still doesnt come out. I can turn the screw but it doesnt loosen.
03-27-2008, 05:11 PM
alright i just read somewhere that its very hard to get out but u need to yank it out with pliers but thanks for the help
03-27-2008, 09:59 PM
Sorry I couldn't help more! I was looking everywhere for the answer and for some reason couldn't find it. :(
03-28-2008, 02:11 PM
The imagine select uses an AMG bolt, pull on the pin hard, it will pop out.
03-29-2008, 08:30 AM
my bolt is still rediculously jammed. ive tried using a pencil and a screwdriver to get it out, but even with a lot of force, it still isnt moving at all. I dont know what to do now. does anyone know?