PDA

View Full Version : co2 rockin help


ace._
03-22-2008, 03:46 PM
hi again guys i just bought my rocking trigger and i wanted to know since the bottom doesnt screw onto the new frame do i need to get a remote coil ? or do i have to make the screws ? and if i do need to get the coil where do i put the co2 will i need to hold it the entire match ?

Critical
03-22-2008, 04:09 PM
The MR1 has a standard ASA mount, the rocking trigger has the Spyder offset mount. What you need is either to swap in an ASA that is offset in place of the original, buy an aftermarket AKA that fits, or buy the adapter that will allow you to use your existing parts.

Doing one of those things, you will not need to get a remote coil, however, if you choose to use only a remote, you can buy an adapter that threads into the foregrip that the remote would attach to. You would then need a harness or something similar that would hold your C02 bottle on your back.

oldironmudder
03-22-2008, 04:18 PM
You could also drill & tap the standard holes.

irishwarrior
03-22-2008, 05:49 PM
I had the same issue and just went remote, it was easier IMO.