PDA

View Full Version : Reverse Spimmy


king-man
03-10-2008, 08:17 PM
Its possible to use a spyder body abd timmy parts, could you do it the opposite, i know it kinda defeats the purpose but i love timmy bodies

VS3 Sniper
03-10-2008, 08:47 PM
If I were u I would just buy a timmy.

bigred76
03-10-2008, 10:03 PM
I scratched my head something fierce when I read your post... It'd be absolutely foolish to put it in, and the sizing would be off (Timmy's are longer than Spyders by a little bit), but I suppose it could be done with a little modification... HOWEVER! The striker would most likely get caught in the bottom tube somewhere, snagged on the milling. I wouldn't trust it one little bit!

MVS1
03-10-2008, 10:59 PM
It wouldn't work, the underside of the timmy bodies is open/milled to allow for the hose barb on the front of the ram tube, this opening is right were the valve oring is so the valve would not be able to seal adequately. This along w/other obvious issues (no holes in the body for cross-pins to keep the valve in place, etc) make it better to just get a Timmy and enjoy the benefits of elctro-pneumatics.