PDA

View Full Version : little problem


pbmatt
02-19-2006, 04:05 AM
I have a spyder sonix 05 and i wanted to do a trigger job when i went to take of the front screw it was very tight and i striped it now i cant take it off i can still take off the back one

shunut
02-19-2006, 05:49 AM
First of all, Welcome to the forum. You won't find friendlier guys, who are more willing to help anywhere.

As for your problem, are you talking about the screw that holds the trigger frame to the body? If so I'd take it to your local paintball shop and see if they can help you. If not, call Kingman and see if they can help.

pbmatt
02-19-2006, 06:02 AM
thanks do you know if i can buy a new scerew?

or do i gota buy a parts kit or somthing?

shunut
02-19-2006, 06:36 AM
You can get a new screw. The screw size is metric, M5 x 12mm.

pbmatt
02-19-2006, 07:19 AM
ok good thanks

but if they can't get it off, am i screwed?

shunut
02-19-2006, 08:00 AM
I wouldn't say that you are screwed. If you can't get it off call Kingman, I'm sure they will be able to help you. You might have to send it in to them but they should be able to fix it for you.

vikingshadow
02-19-2006, 08:12 AM
Nah, all you need to do is cut a slot across the top of the screw either with a dremmel or a hacksaw. (I'm assuming you mean you stripped the hex head part out.) Then use a flat head screwdriver to remove it.

I've done this multiple times - I actually HATE screws with hex holes in them anymore! As far as getting a new screw, go to Wal-mart or your local hardware store and find one. MUCH cheaper!

pbmatt
02-19-2006, 09:05 AM
ok thanx, i'll do that

should we close this? how?

shunut
02-19-2006, 09:22 AM
Nah, no need to close it, if your problems have been solve people will just stop responding to the thread.

PWNDuAgain
10-21-2006, 06:08 PM
just use a strong glue to glue a nut to the top of the screw, then you can use a nut driver to get the screw out. Or you could just use a drill and drill the screw out.