bamf-hacker
03-07-2008, 05:38 PM
Please do not discuss whose gun is in the picture. If you know, keep the secret. You may discuss it in this thread...just not whose it is.
NO OTHER PICTURES ALLOWED in this thread....
Vote for the Spyder you like best or the one that you feel has the most work done or improvement.
Make sure to vote in all the polls
Votes will be made public to avoid cheating. Any gun found to have fraudulent votes will be disqualified.
Polls close in 5 days. Have a great contest!
If you don't see your marker, even though you entered, then it was not in the right format or the picture was invalid (I allowed a slightly larger picture size on a few of them, and if your specs are not shown it is because you did not submit them in the right format. If you want them in PM me in the correct format and I will add them)
************************************************
And the Markers are........
1- VS2 (VSX)
Trinity VS Silver Body, Trinity VS Red Front Block, CP Long Reg, New Designz Quik Flip On/Off ASA, New Designz Feedneck, Freak 14 in Barrel, Scenario Dreams T-Board
http://i248.photobucket.com/albums/gg177/smitty_aceweb_com/VSX.jpg
2- MR2
T-board w/eyes installed, ACP bolt 2 oring, MR wraparound grips, rap4 16" tactical rifled barrel w/whisper brake, PMI LB supressor shroud, Handguard, Timmy detents, Trinity Car stock, BSA scope
http://i108.photobucket.com/albums/n36/xxMikeRotchxx/005.jpg
3- 05 Electra
Half Backed/Polished Electra Body, 32* Valve, Bob Long Gauge, CiP Assault Block, DH Ti Striker, Evil Detonator, Kingman ESP Frame, J&J Ceramic 16" Barrel, T-Board Ver. C, MuddyTaco Trigger, Dye Stickies, Critical Iron Cross On/Off ASA, 05 Sonix Bolt - Modded, Polished Trinity Feedneck, Modded Switch
http://photos-829.ll.facebook.com/photos-ll-sf2p/v197/57/36/515934829/n515934829_340465_6026.jpg
4- 05 Spyder Pilot
Alamo City 3 o-ring bolt, CCM Clamping feedneck, Stock polished striker, CP On/Off ASA, 1200 and 600 PSI Bob Long Guage, Ver. C T-board and red eyes, Dye Sticky 3's, Muddytaco trigger w/ magnet mod, 50 gram switch, Check-it 15* Assault Block, NDZ HP valve and pin, Kila eye covers
http://i101.photobucket.com/albums/m57/pb34/P1010206.jpg
5- STBB
custom victor body, ESP frame, dipswitch board w/ roller switch, modded trigger, Dye Sticky 3s, shortened feedneck w/ Java slip-on, custom BE Eradicator/Marauder barrel, otterized internals (minus stock valve), CIP Assault Block, BL '04 Torpedo reg
http://img.photobucket.com/albums/v111/DFSniper/Paintball%20Markers%20and%20Gear/DSC04424-small.jpg
6- VS2
Black annod body, shocktech bolt, timmy detents, polished eye covers, polished striker, hammerhead barrel kit, CP rake trigger with magnet mod, virtue board, red laser eyes, green laser eyes, shocktech lpc, hybrid grips on the way to my house, polished feedneck (shocktech not pictured), New designz reg adapter, macrolineguy fittings and macro, hyper 2, CP micro Razor drop, hybrid 1/4 turn asa, 32* spring kit, and stock frame dremeled so I don't pinch my eyes.
http://img337.imageshack.us/img337/9027/vs22kr8.jpg
7- MR1
NcStar Red Dot Sight, Tiberius Arms Tac Light w/ Pressure Switch and Red Filter, RAP4 MR1 14" Riffled Barrel w/ Frostbite Muzzle, Extreme Rage Spring Kit, VL 200 Hopper, Modded Disconect Pin w/ Cotter Pin, TacStar #4 Universal Barrel Mount, MR Series Handle, Raised Tactical Rail
http://pictures.aol.com/galleries/spydermonkey01/12c0HC0QZgfPPZ9Iqf3JUt*LFaExobzBwcPmv4xQp5Fd3Ig=/large/
NO OTHER PICTURES ALLOWED in this thread....
Vote for the Spyder you like best or the one that you feel has the most work done or improvement.
Make sure to vote in all the polls
Votes will be made public to avoid cheating. Any gun found to have fraudulent votes will be disqualified.
Polls close in 5 days. Have a great contest!
If you don't see your marker, even though you entered, then it was not in the right format or the picture was invalid (I allowed a slightly larger picture size on a few of them, and if your specs are not shown it is because you did not submit them in the right format. If you want them in PM me in the correct format and I will add them)
************************************************
And the Markers are........
1- VS2 (VSX)
Trinity VS Silver Body, Trinity VS Red Front Block, CP Long Reg, New Designz Quik Flip On/Off ASA, New Designz Feedneck, Freak 14 in Barrel, Scenario Dreams T-Board
http://i248.photobucket.com/albums/gg177/smitty_aceweb_com/VSX.jpg
2- MR2
T-board w/eyes installed, ACP bolt 2 oring, MR wraparound grips, rap4 16" tactical rifled barrel w/whisper brake, PMI LB supressor shroud, Handguard, Timmy detents, Trinity Car stock, BSA scope
http://i108.photobucket.com/albums/n36/xxMikeRotchxx/005.jpg
3- 05 Electra
Half Backed/Polished Electra Body, 32* Valve, Bob Long Gauge, CiP Assault Block, DH Ti Striker, Evil Detonator, Kingman ESP Frame, J&J Ceramic 16" Barrel, T-Board Ver. C, MuddyTaco Trigger, Dye Stickies, Critical Iron Cross On/Off ASA, 05 Sonix Bolt - Modded, Polished Trinity Feedneck, Modded Switch
http://photos-829.ll.facebook.com/photos-ll-sf2p/v197/57/36/515934829/n515934829_340465_6026.jpg
4- 05 Spyder Pilot
Alamo City 3 o-ring bolt, CCM Clamping feedneck, Stock polished striker, CP On/Off ASA, 1200 and 600 PSI Bob Long Guage, Ver. C T-board and red eyes, Dye Sticky 3's, Muddytaco trigger w/ magnet mod, 50 gram switch, Check-it 15* Assault Block, NDZ HP valve and pin, Kila eye covers
http://i101.photobucket.com/albums/m57/pb34/P1010206.jpg
5- STBB
custom victor body, ESP frame, dipswitch board w/ roller switch, modded trigger, Dye Sticky 3s, shortened feedneck w/ Java slip-on, custom BE Eradicator/Marauder barrel, otterized internals (minus stock valve), CIP Assault Block, BL '04 Torpedo reg
http://img.photobucket.com/albums/v111/DFSniper/Paintball%20Markers%20and%20Gear/DSC04424-small.jpg
6- VS2
Black annod body, shocktech bolt, timmy detents, polished eye covers, polished striker, hammerhead barrel kit, CP rake trigger with magnet mod, virtue board, red laser eyes, green laser eyes, shocktech lpc, hybrid grips on the way to my house, polished feedneck (shocktech not pictured), New designz reg adapter, macrolineguy fittings and macro, hyper 2, CP micro Razor drop, hybrid 1/4 turn asa, 32* spring kit, and stock frame dremeled so I don't pinch my eyes.
http://img337.imageshack.us/img337/9027/vs22kr8.jpg
7- MR1
NcStar Red Dot Sight, Tiberius Arms Tac Light w/ Pressure Switch and Red Filter, RAP4 MR1 14" Riffled Barrel w/ Frostbite Muzzle, Extreme Rage Spring Kit, VL 200 Hopper, Modded Disconect Pin w/ Cotter Pin, TacStar #4 Universal Barrel Mount, MR Series Handle, Raised Tactical Rail
http://pictures.aol.com/galleries/spydermonkey01/12c0HC0QZgfPPZ9Iqf3JUt*LFaExobzBwcPmv4xQp5Fd3Ig=/large/