PDA

View Full Version : Need Help With Something


XSiv Force
02-21-2008, 06:08 PM
IM trying to put all the orings into my PMI Piranha. The kit i bought came with 3 bolt orings, and 1 front bolt oring. What and where does the front bolt oring go? There is only 3 spots i can see where orings go on the bolt. Am i making this harder than it should be? All the orings i got are the same color, too.

druid
02-22-2008, 11:05 AM
I have 2 PMI's as yours is. They all go on the Bolt and Striker...except mine were clear for the bolt and blue for the striker.

XSiv Force
02-22-2008, 11:14 AM
yeah they are all white except for the barrel oring and the striker, my proble is what is the difference between the front bolt oring and the bolt orings

druid
02-22-2008, 09:50 PM
I really don't know the answer to that...lol. It's possible it's for the LP chamber or the ORing for the VA but since I've never had to remove it, I'm not positive.

What I do know is, the striker ORing is a different diameter than the bolt ORings (and is also different than a Spyder striker ORing) - which is why it's the color it is.

I think you are overthinking the rebuild. Just replace the ORings with the similar replacemenhts, drip some oil on them and go play.

Here are manuals I've found on-line though...

http://www.paintballsolutions.com/05pb_solutions/pdf_manuals.asp

http://www.ultratwistedpaintball.biz/page/MANUALS.html

http://www.paintballsolutions.com/05pb_solutions/pdf/manuals/Piranha/piranha_5.3.pdf