PDA

View Full Version : Pilot Project


SpyderMan723
02-11-2008, 02:51 PM
Alright guys, I may be starting a pilot LP project very soon after I finish my MR2.

Heres my product list:
1)Trinity front block
2)Evil Detonator reg
3)32* valve
4)ACP bolt
5)CP razor drop
6)SPPS magno trigger
7)CP classic barrel (black)14"


any suggestions?input?ideas?comments?questions?etc?

pilotsoldier83
02-11-2008, 03:16 PM
sticky3 grips, clamping feed neck, t-board and of course a hopper, possibly the evo III. they keep up decent

SpyderMan723
02-11-2008, 03:43 PM
I already have a clamping feedneck.

but i forgot about stickies and the t-board.

I might pick up a VLocity jr w/gangstar.

thanks soldier!

bigred76
02-11-2008, 03:47 PM
You might want an on/off ASA, and I'd suggest something other than a Detonator... yeck...

VLocity JR w/Gangstar is as sick as ****! I love mine.

newkid
02-11-2008, 04:06 PM
if you have the cash and skill make it into a spimmy

SpyderMan723
02-11-2008, 04:10 PM
Bigred what would you suggest for a reg then?

and newkid, i dunno if i wanna make it into a spimmy.
I might sometime later on.

thanks for this input you guys

pilotsoldier83
02-11-2008, 05:26 PM
vlocity jrs are sweet but the evo III with z board is just as fast but $30 cheaper, just tryin to save you some cash. oh and i know that you were lookin at the acp bolt, but my buddy has a shocktec bolt thats sick. and i second the on/off asa, and possibly a cp reg theyre decent

SpyderMan723
02-12-2008, 10:28 AM
I might stay with the ACS because its already broken in.

But heres a picture i drew at school today.
without paint:http://i108.photobucket.com/albums/n36/xxMikeRotchxx/Pilotprojectroughdraft.jpg

With paint:http://i108.photobucket.com/albums/n36/xxMikeRotchxx/Pilotprojectroughdraftwithpaint.jpg

new list:
Trinity block, red
CP long,red
CP classic barrel 14", red
Trinity on/off,(supposed to be)black
CP razor drop,black
CP sling?,black
NDZ low rise,(already have)red
Trinity grips,black
T board with red eyes

pilotsoldier83
02-12-2008, 02:54 PM
so youre goin with the evo III?

SpyderMan723
02-12-2008, 03:04 PM
I still need to convince my dad to give me his pilot!

but the eggy3 is a possibility, on the picture i drew it just because its easy to draw lol

but i might have to actually buy a brand new pilot instead of hijacking his.

kramernator
02-12-2008, 06:49 PM
pilots are only like $70 anyway.

maybe get a maddman valve instead of the 32* one, i have heard that they work very well.

also, make sure that you polish the striker and get a spring kit.

if you have any other questions about going Lp look to Otterscustoms (http://www.ottersccustoms.com/spyder.html)

SpyderMan723
02-13-2008, 05:46 AM
pilots are only like $70 anyway.

maybe get a maddman valve instead of the 32* one, i have heard that they work very well.

also, make sure that you polish the striker and get a spring kit.

if you have any other questions about going Lp look to Otterscustoms (http://www.ottersccustoms.com/spyder.html)

yea but... i was planning on buying a PS3, and i already have a marker in working condish. So I'm probably going to hold off on the project for now

pb34
02-13-2008, 07:30 AM
I would get a CP on/off as opposed to the Trinity. They work much better (I own both). I would also recommend an NDZ Valve over the 32* valve.

SpyderMan723
02-13-2008, 09:43 AM
I would get a CP on/off as opposed to the Trinity. They work much better (I own both). I would also recommend an NDZ Valve over the 32* valve.

kk thnx