View Full Version : Feedneck for VS3

02-06-2008, 04:49 PM
The feedneck that connects my hopper to the gun is kind of difficult to get tight. Is there an aftermarket out there that is pretty good. I really do not like to use tools to crank it down.

02-06-2008, 05:27 PM

Circuit Boards-
Scenario Dreams T-Board http://scenariodreams.com/productpages/electra.htm
Tadao Technologies http://www.tadaotechnologies.com/default.asp
The Tadao board is a drop in replacement, it works with the stock eyes.
Virtue circuit board http://www.virtuepaintball.com/index.cfm?fuseaction=catalog.prodInfo&productID=337

They use the same Spyder threaded barrels as all Spyder guns.
The VS3 however limits you to a select few choice of barrels. The shroud doesn't allow enough room, a possible solution is to file it down. I'm gonna try to get a list of all barrels that will fit the VS3 without modding the shroud. Pm me barrels that you know will work.
Barrels that fit the VS3:
1. J&J Ceramic
2. Python Barrel Kit
3.Trinity Accurate
4. 07 Freak backs produced after June 07

You can use either a direct mount or dovetail mount (rail). The dovetail mount looks much better.

Front Block/ Regulator Adapter
The only front block available right now is from Trinity- http://www.trinitypaintball.com/ProductDetails.asp?ProductCode=TR+229
Trinity Reg. Adapter- http://www.trinitypaintball.com/ProductDetails.asp?ProductCode=TR+317
New Designz reg. adapter- http://www.newdesignz.com/SpyderVS.htm
Custom Products reg. adapter- http://store.customproducts.us/index.cfm?fuseaction=catalog.prodInfo&productID=192&categoryID=23

Trinity- http://www.trinitypaintball.com/ProductDetails.asp?ProductCode=TR+233
MuddyTaco- http://www.spyder.tv/forums/showthread.php?t=9807
CP Sling- http://store.customproducts.us/index.cfm?fuseaction=catalog.prodInfo&productID=195&categoryID=31

Trinity Sick Body-
This is for nothing but aesthetic value. Alot of guys have problems with them leaking air. I have yet to run into this problem and have put over 10 of them on VS2/3. Trinity supplies you with new o-rings to go onto the valve and front block, use them along with the dow55 they provided. Do not put dow55 on striker or bolt o-ring only on valve and front block o- rings. Also make sure when your putting the front block on to press it against the body as your tightening the screw.

Color Body Kits and Barrel Tip-
They include feed neck clamp, metal eye covers, low pressure chamber, foregrip riser, and striker plug. http://www.spyder.tv/section/products/vs_series/accessories.html
The barrel tip is bought seperatly. http://www.spyder.tv/section/products/vs_series/accessories.html

They are Ion threaded so any Ion thread will work with the VS
New Designz Pro Clamp- http://www.newdesignz.com/SpyderVS.htm
CCM No Rise Clamping- http://www.chipleymachine.com/
Redz Cam Lock- http://www.redzcomfort.com/storefront/detail.aspx?ID=11
Function 07 Clamping-

Hybrid Contract Killer- http://www.hybridpaintball.biz/products.php?cat=9

Bolts and Strikers
Alamo City Low Blow Bolt- http://www.alamocitypb.com/MANUFACTPAGES/lowblow.html
Alamo City Del Flo Bolt- http://www.alamocitypb.com/MANUFACTPAGES/bolts.html
Alamo City VS2/3 Delrin and Steel Striker- http://www.alamocitypb.com/MANUFACTPAGES/ACCESSPIX/vsspyderstriker.html
Alamo City VS1 Delrin and Steel Striker-http://www.alamocitypb.com/MANUFACTPAGES/ACCESSPIX/spyderstriker.html
Shocktech Bolt- http://www.buyshocktech.com/pages/marker_parts/spyder/mp_spy_vsBOLT.htm

Spring Kits
The valve springs in the VS can use any compact spyder valve springs.
There are no main springs made for the VS2/3. If you find that your main spring is weak, you can cut yourself shims out of cardboard. Another alternative is to use flat washers as a shim. Be sure to chronograph your gun after you mess with the springs.

What You'll Need to Upgrade Your Regulator
You either need a Trinity front block or regulator adapter. You'll then need a new inline regulator. Since your current regulator is also your asa your gonna need a new asa as said before you can either get a rail type or direct mount. To hook everything up you'll need macro fittings and macroline . These will vary depending on your setup if you need 90* elbow or straight fittings. You cannot reuse the current fittings because they are metric threads and most products use s.a.e. threads.

I like the Redz clamping necks, cheap to for a quality neck.

02-07-2008, 05:13 AM
what about a q lock