PDA

View Full Version : Lubing!!


Zues
01-31-2008, 10:43 AM
For my VS2 Ive never lubed it... What parts of the gun should i lube and whcih lubricants and oils should i use??

king-man
01-31-2008, 10:54 AM
i use gold cup, lube the triker and its oring realy good, a light film on the bolt oring never hurts, jsut not on the delrin part, taek your asa apart and put a little lube, on the orings in there, you can use oil here but non swelling greases is better so it doesnt go back in your tank, then lastl, takyour valve apart and put some oil on the two orings in there, bam youve jsut completely lubed up your gun, SLEEZ is a good lube for the ASA/REG
OH and if youre having any trouble with your bolt catching on the detents, put a light film on those two, thats optional, also if you put oil on the bolt make sure you clean out the top tube regularrly, oil attracts dirt

Zues
01-31-2008, 04:01 PM
Could i Use DOW 33 on the ASA o-ring?

spray and pray
01-31-2008, 05:08 PM
make sure you lube org006 (find out what it is in your manual) it is hidden in the valve. You will have problems without lubing it.

king-man
02-01-2008, 10:14 PM
make sure you lube org006 (find out what it is in your manual) it is hidden in the valve. You will have problems without lubing it.

im guessing that is the one that is like inside the valve, wher teh pin runs trough on the striker side

spray and pray
02-02-2008, 04:29 AM
yeah, it's easily overlooked. Lubing it fixed my friends problem.

Zues
02-02-2008, 08:16 PM
FOR the ASA O-Ring could i use DOW 33 TO LUBE IT??