PDA

View Full Version : My Eyes!!!!!!


JailBreakJIm
01-30-2008, 04:02 PM
my halo b eyes dont seem to be working
i dont know if its the board or the eyes
HELP
MY EYES!

Hossy
01-30-2008, 04:09 PM
take the gun apart to see if there are any pinched wires. If not, check your batteries.

pb34
01-30-2008, 06:05 PM
take the gun apart to see if there are any pinched wires. If not, check your batteries.

I think you mean hopper. :)

JailBreakJIm
01-31-2008, 03:39 AM
and if the wires are pinched?

kramernator
01-31-2008, 08:46 AM
unpinch them, then make sure that there are no bare wires. you may need some electric tape or a solder gun or both.

JailBreakJIm
01-31-2008, 12:19 PM
what are the eyes actually supposed to look like
i have one thats clear and the other is darkish
i also saw that the electrical tape had melted around the dark eye

MVS1
01-31-2008, 12:53 PM
Did you by chance install the connector on the board for the eyes upside down? The Clear eye is the transmitter eye and the dark eye is the receiver. The receiver is a form of photo-diode that is powered by light (be it infrared or other source (Lazer)), sounds like that is what happened and the receiver eye is burnt out. Replace your eyes and you should be good to go. If not then the problem is with your board.

JailBreakJIm
01-31-2008, 02:00 PM
all is fixed


it was just a matter of taking it apart and cleaning it


And a good amount of duct tape