PDA

View Full Version : Loader for Pilot ACS


mr1newbie
01-29-2008, 06:42 PM
What's a good electronic loader for the Pilot ACS? I was thinking a Halo, so with upgraded electronics you wouldn't have to get a faster loader. Thanks

Sandman_Bravo
01-29-2008, 08:02 PM
I am partial to the Empire Reloader B. They are sound activated and have no problems keeping up with any marker.

FAQTO
01-30-2008, 05:23 AM
i ran an eggy3 with no problems but switched to a halo-b, or go with a empire reloader-b as sandman bravo said
james

Solar
01-30-2008, 05:49 AM
I have a Empire Reloader 2 (not force fed like the B) and it does ok. I can out shoot it sometimes (if the hopper is full it can usually keep up). But I recently picked up a Halo B and had some problems. I kept having balls break in the chamber. I think i just had bad paint though because most people i've talked to have no problems with a Halo B.

If you are thinking about upgrading your board or ever getting a higher end gun, I would deffinately spring for a halo B or a Reloader B. (you can get them used for pretty cheap - Got my halo B for 30 Bucks.)

sloazzpilot
01-30-2008, 09:43 AM
i have the standard empire loader that is sound activated, it works great and it was not very costly. also it is a quiet loader, out of 5000 balls i have chopped one in the hopper, the battery in the marker was going dead, but other than that great hopper.

bigred76
01-30-2008, 09:47 AM
I'd sugest a Reloader/Halo B as well. If you ever decide to upgrade, it's a loader you can keep and expect to keep up with you for a little while.

xsvly-fat
01-30-2008, 11:10 AM
jr, it works great with mine the battery life is bad but if you get a chip its nice.

mr1newbie
01-30-2008, 02:55 PM
Thanks for the help!

paintkid12
01-30-2008, 04:37 PM
I used to run an empire reloader 2 then i got a vlocity wich works really well.lots of people say that the force feed is really loud but i dont notice it at all and keeps up really good wit my pilot with t board. only thing is when u get low on paint 20 balls or so it tends to send the balss all over.vlocity are allso easyier to clean/ take apart

mr1newbie
01-30-2008, 05:03 PM
What about a VL Revolution Force? Are they okay?

pathOFdisaster
01-31-2008, 08:45 AM
I use the Fasta hopper.. It rocks. After my buddies saw how well mine works, they went out and bought one. Both had other e-loaders and switched to Fasta.. I'd recommend it. The 9V version I have is rated at 15bps, and keeps up with the gun on auto...and keeps up with me walking it a bit faster

paintkid12
01-31-2008, 12:45 PM
revolutions are not really that good if i were u i would look for a used vlocity or reloader b or fasta