PDA

View Full Version : virtue board and vs2.


spray and pray
01-10-2008, 03:39 PM
The eye wires are a little long. Where should I put all of the extra coard thats hanging out? Would I be able to cut it and make it shorter and than solder (I think thats how you spell it.) it back together? Would that work or would it just kill the eyes?

swoosh81
01-10-2008, 03:51 PM
If your good with a soldering iron, go for it. If your not pull the excess wire back into the grip frame. Don't pull literally, you have to have the eyes set where you want them when you put the 2 frames together.

pbfreak555
01-10-2008, 06:58 PM
when i had mine i tied them in a knot to make them shorter. just dont tie it too tight because it might damage them or cut off electricity.

DRAGON
01-10-2008, 07:26 PM
Search (http://www.spyder.tv/forums/showthread.php?t=10572) and ye shall find -

spray and pray
01-11-2008, 09:14 AM
ok got it.
I just put the eyes in. I am in semi unlimited rof. With the eyes on I can't shoot past 5 a second, it seems like it's capped there. (no paint, just noid clicking) when I turn the eyes off I can shoot my normal speed. Please help.

swoosh81
01-11-2008, 10:08 AM
The eyes could be reading error. Alot of baords are set up this way.

spray and pray
01-11-2008, 12:14 PM
fixed. Virtue told me what to do.

swoosh81
01-11-2008, 12:18 PM
Then why ask us if you contacted Virtue? When the bolt is forward the eyes will read error.

Zues
01-11-2008, 01:26 PM
Guys... the Virtue looks really confusing should i just go with the Tadao + UPGRD Chip?

spray and pray
01-11-2008, 01:40 PM
not confusing. I'm just not good with technology..... The virtue is simple once you dedicate a lot of time (2+ hours) to get your gun set right with eye delay, ramp percentage (took me a while to figure out what this did), bps cap, mechanical bounce, ramp activation speed, debounce. Once you get all of that set you will be firing faster than ever and you won't chop at all.

Doc77
01-11-2008, 02:35 PM
Tadao plus chip has all those config options too....so to be honest, you'll have to deal with it with which ever board you go with.....unless you go with an unchipped tadao. But think about it, is it really such a bad thing to spend time figuring out your marker & setup?

spray and pray
01-11-2008, 02:44 PM
It isn't a bad thing but just too much time.

Zues
01-11-2008, 04:43 PM
Well does it come with a manual which tells you how to set everything (eyes,ramp,bounce) .....??

spray and pray
01-11-2008, 04:45 PM
yes. Zues check your pms.