PDA

View Full Version : esp


QRFleader
02-14-2006, 10:15 AM
I ran an egrip off of an e99 over the weakend, it did nothing but break paint. I was a little disapointed, but as far as running the simi grip that came with it I have shot 4 cases of paint without a break

Kingman-Rep
02-14-2006, 10:52 AM
You will most likely need to change the bolt. The sear that sits inside a mech frame sits a little further back than the sear that sits inside an eframe. put the eframe on and look to see if you see the bolt sitting forward?

ooglieboogliebob
02-15-2006, 02:31 PM
hmm .. i personally think the stock bolt is pretty good ... have you tried otterizing your bolt ??? Also, have you tried polishing ?? ... always remember to clean and relube your gun after every game. Also lube anything that moves ... always good for the gun :) ... also check for bad o-rings.
Bolt Mod (http://www.ottersccustoms.com/boltmod.html)
Polishing (http://www.ottersccustoms.com/polishing.html)

QRFleader
02-16-2006, 08:48 AM
oh yea, I treat it like one of my real guns, It stayes cleaned and inspected

ooglieboogliebob
02-16-2006, 02:36 PM
hmm ... im not sure what to tell you ... is it a barrel break or a bolt break ??

make sure you have a good paint to bore match on your gun