PDA

View Full Version : MR2 bolt


bassmasta
01-04-2008, 11:19 AM
is there any way to fit the MR2 bolt onto the MR1?

mr1 sniper
01-04-2008, 12:05 PM
why, just use the stock one or buy one from alamo city paintball

bassmasta
01-04-2008, 01:31 PM
I don't have cash to buy a new one for my MR2, so I plan to replace it with the bolt from my brother's MR1

mr1 sniper
01-05-2008, 03:06 PM
ok, i thought you had the mr1 and you just wanted an mr2 bolt. sorry though cant help you on if it will fit. it might not though because the mr1 is top cocking and i think the mr2 has the t bar think to cock it. correct me if i'm wrong

deano 177
01-06-2008, 07:34 AM
ok, i thought you had the mr1 and you just wanted an mr2 bolt. sorry though cant help you on if it will fit. it might not though because the mr1 is top cocking and i think the mr2 has the t bar think to cock it. correct me if i'm wrong but it should be the basic same design. It is still a top cock. the rod is just shorter and fit with the T handle.

SpyderMan231
01-08-2008, 07:10 PM
take the bolts out of each gun and trry it.

new_Faction64
01-08-2008, 09:19 PM
You CAN use the MR1 bolt in the MR2. I don't know the procedure to change up the bolts to fit the MR2, but it can easily be done. Do a forum Search.

bassmasta
01-11-2008, 09:25 PM
I got the MR1 bolt to fit the MR2, but the MR2 bolt will not fit in the MR1. {that was the point of the thread, faction}.

deano 177
01-12-2008, 10:09 AM
I got the MR1 bolt to fit the MR2, but the MR2 bolt will not fit in the MR1. {that was the point of the thread, faction}. Why doesnt the MR2's bolt fit in the MR1?

bassmasta
01-12-2008, 03:48 PM
the MR1 cocking pin doesn't have the right spacing for the bearing to hold it in. after a few shots, it flipped out the top of the striker.

deano 177
01-12-2008, 04:23 PM
the MR1 cocking pin doesn't have the right spacing for the bearing to hold it in. after a few shots, it flipped out the top of the striker.

use a drill and a grinder. make your own like this (http://server.myspace-shack.com/d14/DSC01068_1.jpg)...

bassmasta
01-13-2008, 07:54 PM
>.> I'd rather not. last time I went around grinding internals I had to throw out my gun. and I don't have a dremel/decent grinder. mine spins too slowly to cut accurately.

deano 177
01-14-2008, 08:23 AM
>.> I'd rather not. last time I went around grinding internals I had to throw out my gun. and I don't have a dremel/decent grinder. mine spins too slowly to cut accurately.

No dude. Just get a standard 1/4X20 bolt that doesn't have threads all the way up. put it in the drill for the spinning action and touch it to the grinder. It will make the notch perfect.

bassmasta
01-14-2008, 02:17 PM
that does seem easy, but the catch is that it needs to look like the original cocking pin. the "Donator" doesn't know that I want his bolt.