View Full Version : T board ver c settings

01-03-2008, 01:38 PM
what does everyone set dwell and eye delay and that sort of stuff as i know its normally personal prefences but i was just wondering what other peopl use as a quick way to set it up

01-03-2008, 04:06 PM
Dwell, default setting, debounce depends on how mod'd your pilot is; LP, lightened micro switch, etc., increase it until your satisfied with how it shoots, sometimes bounce is a good thing (as long as your hopper can feed fast enough) I think I've got mine around 12 ms, as for eye delay...do you have eyes installed? If not don't worry about it, if you do then 5 ms works for me but experiment and see what you like. Everything is really personal preference, tinker with the setting and see what you like.

01-04-2008, 09:24 AM
iv got a trinity front block and switched the steel braid to macroline.i have it all drilled for the eyes and that.and i have a 50 gram micro switch.and in turns of hopper i have a vlocity so it should keep up .i use hpa as well

01-04-2008, 09:26 AM
i have the eye holes drilled on the bottom of the chamber if that makes a difference