PDA

View Full Version : reg question


kramernator
12-31-2007, 06:46 PM
can i run Co2 through this reg (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=yy6iXRLoif6i0FWRbp9i9RhONMM7jiY0UI8=?Pro ductID=PbLAqArbpFEAAAELxouSKm0q) and will it connect with this block (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=8ipfRrvR8T1fzfyoV4uf7rEY4OhWWrsPHTg=?Pro ductID=_Q3AqArbVHwAAAEJk2bsdwN5)?

will Co2 work this this cp reg (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=yy6iXRLoif6i0FWRbp9i9RhONMM7jiY0UI8=?Pro ductID=b7SsFAY75mAAAAD8shvJWrji)?

if not, what reg can i run co2 through?

thanks!

Hossy
12-31-2007, 06:51 PM
Didnt you have another thread asking the same question basically?

Im almost certain that you can use the Worrgames one because Cockers run on CO2 as well, but id wait to see what others say.

The CP one will not run with CO2

druid
01-01-2008, 01:58 AM
Didnt you have another thread asking the same question basically?

Im almost certain that you can use the Worrgames one because Cockers run on CO2 as well, but id wait to see what others say.

***The CP one will not run with CO2

***This is wrong....

CP regs work fine with CO2 because I've used it with them. Does it require more frequent cleanings and ORing changes? Yep...it does...but it works with it just fine otherwise.

However...that particular CP reg only has an output of <500 psi...so unless you have a marker that operates at below 500 psi...it's not going to work well for you.

Yes, the BM reg will fit the Trinity vertical adapter because all VAs are threaded to accept vertically mounted CO2 bottles...and similarly threaded stuff like all in-line regs and va/asa adapters.