PDA

View Full Version : New Pictures: Ghillie, Stock, Sling, Mask


cyberthrasher_706
12-25-2007, 05:14 PM
It's taken a while but I finally got some updated pictures of my gear. Let me know if you have any questions about any of it. It's all pretty basic.
Stock = JCS Voodoo

remote pack = is just a camel pack with a hole cut in the bottom of it for my tank to poke out and the sleeves from my shirt cut into strips and sewed up around the netting of the pack.

Mask = V-Force Profiler, Note: There is a reason they don't make GoggleSkinz for this mask!!!I thought I'd give it a try since I found some that wasn't pre-cut and it was pretty cheap on ebay. To many curves, had to make relief cuts in the middle of the mask. Haven't played with them yet but the cut marks aren't very visible.

Sling =This is just some braided up leather for silence purposes and a strap from an old laptop case that has plastic clips. I hate metal clinking around on me. Drilled a hole through the "magazine"'s corner and made a little ring to fit through it.

http://i132.photobucket.com/albums/q30/mkmewes/5L4Y3R/Paintball/DSCN0748.jpg
http://i132.photobucket.com/albums/q30/mkmewes/5L4Y3R/Paintball/DSCN0752.jpg
http://i132.photobucket.com/albums/q30/mkmewes/5L4Y3R/Paintball/DSCN0750.jpg
http://i132.photobucket.com/albums/q30/mkmewes/5L4Y3R/Paintball/DSCN0749.jpg
http://i132.photobucket.com/albums/q30/mkmewes/5L4Y3R/Paintball/DSCN0753.jpg

shunut
12-25-2007, 05:21 PM
How is the visibility on the mask with that cover on it?

Hossy
12-25-2007, 05:24 PM
I guess learning the hard way isnt the best...
Looks good!
Dont get gogged or that will be a pain to clean lol

DFSniper
12-25-2007, 07:02 PM
how do you like the stock? i was seriously considering one for my gun...

newkid
12-25-2007, 07:02 PM
goggleskins are just odd on profilers imo

stil
12-25-2007, 09:27 PM
cyber: What do you think of having a grip on the barrel?

cyberthrasher_706
12-26-2007, 01:08 PM
How is the visibility on the mask with that cover on it?
Visibility's fine, it's barely any darker than normal.

I guess learning the hard way isnt the best...
goggleskins are just odd on profilers imo
yeah, I'm just always looking for a way to conceal everything, especially since my goggles are the only thing that give away my position. They don't make GoggleSkinz for the Profiler because it's not only curved horizontally, but also vertically, making it impossible to put on them without problems. That's my guess anyway.

how do you like the stock? i was seriously considering one for my gun...
I really like it, it could use a little more padding on it but the little bit of discomfort is insignificant compared to the original stock which left my arm red for a few days after playing all day. It folds easy, with plenty of room for my huge hands and adjusts as far as I could possibly need it in every direction. Goggle clearance is great, and it looks cool. There's another one they have that will lock in @ angled positions that costs like $30 more but I didn't really see the use for it personally, But You might.

cyber: What do you think of having a grip on the barrel?
I love it. It's in the perfect position for my long arms and with my scope on top of it (not pictured this time) I don't have to worry about any of the clearance issues that come from using the built in rail in front of the bolt. That mount also gives me room to add a flashlight or laser or something, mostly for looks. It has a storage compartment in it for batteries but I just put allen wrenches in it. The "magazine" grip was just way to close for me so shooting was uncomfortable. This is so much better I can't even stand the thought of going without it. Plus my marksmanship went way up since I could keep a steadier hold on the gun.

stil
12-27-2007, 06:53 PM
So how tall are you? :)

I don't use a stock - I tuck the 20oz bottle into my ribs and lean into it. It does feel a bit cramped with my left arm tucked across so I can hold the mag.

I see hex caps on there. Is it held on by tension? Seems like it could chaff the barrel.

cyberthrasher_706
12-27-2007, 07:26 PM
So how tall are you? :)

I don't use a stock - I tuck the 20oz bottle into my ribs and lean into it. It does feel a bit cramped with my left arm tucked across so I can hold the mag.

I see hex caps on there. Is it held on by tension? Seems like it could chaff the barrel.
I'm about 6' 6" with freakish long arms, even for that height. Those screws just screw into the other side of the mount, pulling it into the barrel. I had to go buy longer screws for it since it was made for a firearm which has a smaller diameter barrel. I'm going to throw some camo tape over the barrel to give more camo (obviously) and give the mount a little more to grip but it really doesn't need it.