PDA

View Full Version : Imagine Problem!!!!


jamiecampbell
12-19-2007, 12:45 PM
ok, i air it up, cock it, and i try and fire and all it does is click, then i just keep clicking it like iunno say 20 times maybe? and it will shoot, and re cock, then i will have to hit it like another 20 times for it to fire, any suggestions? i thought is was the sear but maybe not

The Pumper
12-19-2007, 01:02 PM
1. Bad wire connections
2. Low air tank

jamiecampbell
12-22-2007, 08:10 PM
and how do i fix this problem? and i dont think its my tank, it was full when i was firing

DFSniper
12-22-2007, 08:17 PM
check each wire individually to see if its ripped, bent, unsoldered (check the connections under the rubber covering the wires going from the board to the solenoid. that happened to me on both my noids), and make sure that none of the cables are loose in the white mounting brackets.

oldironmudder
12-22-2007, 08:27 PM
Try backing the velocity adjuster out to loosen up the main spring tension.